Site-Specific Health and Safety Plan (HASP) - Laschools.org

Parsons
Activity Hazards Analysis
Ground Water Monitoring Well Installation and Sampling
Job Step Potential Hazards Preventive or Corrective Measures
AHA No. 0003
Inspection Requirements
Visual inpection of Uneven site surface (slips, trips, and falls) Training (see HASP)
sampling/well site
(cont.)
(cont.)
Mobilization of drill Uneven site surface (rollover) Visual inspection of access route to sampling
rig or excavator
areas for soft spots, holes, rocks, etc.
Operator training
Rollover protection (cab or equivalent)
Overhead power lines and structures Visual inpection of access route
Operator training
Breaking of soil Noise of operating equipment Wear necessary hearing protection (ear plugs,
with drill rig or
other powered
equipment and
digging to required
depth for
monitoring well
ear muffs, etc.) while equipment is operating
Overhead hazard Wear hard hat
Open holes from excavation Use barricades around excavation (as
required).
Underground utilities Call 1-800 “Dig” hotline to have utility
companies check site
Pinch hazards of equipment Review Standard Operating Procedures (SOP)
for equipment
No loose clothing or jewelry while operating
equipment
Flying objects Wear appropriate PPE (such as safety glasses
and hard hats. Goggles if a splash hazard.
Face shield for a more severe exposure)
Check PPE for abnormal wear and tear, rips, etc.
Drilling
Lifting augurs or other drilling equipment Follow proper lifting procedures to protect the
(equipment
back; try not to lift alone; use a winch or pulley if
use/maintenance
issues)
possible
Page 2of 5
259