Site-Specific Health and Safety Plan (HASP) - Laschools.org

Parsons
Activity Hazards Analysis
Ground Water Monitoring Well Installation and Sampling
Job Step Potential Hazards Preventive or Corrective Measures Inspection Requirements
Collection of liquid
sample from
surface body of
water
Field testing
sample/excavation
Packing sample
for off-site
shipment to lab
Backfilling well
site
De-mobilization of
drill rig
Falling in When working over or near water, use life
preserver, life buoy with rope, and boat
Lifting sample Follow proper lifting procedures to protect the
back; try not to lift alone; use a winch or pulley if
Slippery terrain; mud or uneven surfaces
(slips, trips or falls)
possible
Worker attention to walking/working surface
Wearing appropriate safety footwear properly
(such as boots with ankle support, laces tied,
proper soles, etc.)
Training (see HASP)
Exposure to analytical chemicals Follow SOP with field kit or field instrument for
handling analytical chemicals or instrument
Accidental breakage of glass bottles Wear cut-resistant gloves during packaging of
glass bottles
Training
Chemical exposure Wear necessary PPE (see potential chemical
exposure section above and/or field kit SOP)
Immediate clean-up of spills
Worker engulfment (when hole is large Check excavation prior to backfilling
enough to enter)
Uneven site surface (rollover) Visual inspection of access route to sampling
areas for soft spots, holes, rocks, etc.
Operator training
Rollover protection (cab or equivalent)
Overhead power lines and structures Visual inspection of access route
Operator training
Equipment contamination Decontamination (see HASP)
Page 4of 5
AHA No. 0003
Check footwear for abnormal wear and tear, rips,
etc.
Check gloves for abnormal wear and tear, rips,
etc.
Check PPE for abnormal wear and tear, rips, etc.
261