Palette VL

Palette VL
CONSOLE POWER UP
1. Power Up Procedure
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
Once the console has been installed and all components connected, the console and processor can be powered up.
To power up:
Step 1. At front of console, press power on/off button. When LED lights up, release button and console will boot.
Step 2. After boot up is complete, verify status by checking black status window at bottom of screen. If it says
"Outputs Disabled" you will need to enable them to On-Line status.
Step 3. To enable outputs, click "File" menu at top right of your screen and select "Enable Outputs." Black status
window should now say "On-Line."
Step 4. If you wish to view your hardware status, this can be found under the "Help" menu.
Step 5. Set your console's personality. This can be found under "Hardware Setup" then clicking on "Console." You
will notice several options to choose from:
a. GeniusPro (500 series) - GP: Command line entry. Utilizes the British spelling of words, for example
"colour" vs. "color" and "counter clockwise" vs. "anti clockwise". This also uses the 500 series channel
colors (magenta is up, cyan is tracking).
b. LightPalette (500 series) - LP : Command line entry. Utilizes US spelling and also uses the 500 series
colors (magenta is up, cyan is tracking).
c. Palette Classic Europe - EU: Command Line entry. Uses the British spelling as well as the LP90 colors
(cyan is up, magenta is tracking).
d. Palette Classic US - US: Command Line entry with US spelling and LP90 colors (cyan is up, magenta is
tracking).
e. Windows UI - UI: Uses pop-up dialog boxes with US spelling, Toolbar with icons and LP90 colors (cyan
is up, magenta is tracking).
All future definitions of button actions will assume the selection of Palette Classic US. This will send all
action buttons directly to the command line. If the dialog box is requested, just press [SHIFT] then the
action button.
Power Up Procedure 13