Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12.8 P-SDLC Port<br />
12.8.1 SDLC duplex mode<br />
12.8.2 Group poll<br />
12.8.3 Group address<br />
SE/PORT Configuration Parameters<br />
Console SNMP Text-based Config<br />
SDLC duplex mode ifwanDuplex [ifwan#] Duplex<br />
Port duplex mode. When set to FULL (full duplex), the SDLC driver can transmit INFO<br />
frames to a secondary SDLC port while polling another secondary port. Full duplex mode<br />
may also be used on a secondary SDLC port in host-to-host applications.<br />
Values: HALF, FULL<br />
Default: HALF<br />
Console SNMP Text-based Config<br />
Group poll ifwanGroupPoll [ifwan#] GroupPoll<br />
Group poll enabled or disabled. When this parameter is set to YES, the group poll feature<br />
is enabled, using the address set with the Group Address parameter, described below.<br />
When this parameter is set to NO, the group poll feature is disabled.<br />
Values: NO, YES<br />
Default: NO<br />
Console SNMP Text-based Config<br />
Group address ifwanGroupAddress [ifwan#] GroupAddress<br />
This parameter defines the group address, used when the group poll feature is enabled (see<br />
Group Poll parameter, above).<br />
Values: 00 - FF<br />
Default: AE<br />
Memotec Inc. 12-17
Change language