Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Legacy</strong> <strong>Data</strong><br />
6.2 Configuring an SNA/SDLC Port<br />
The Setup Port menu lets you configure all parameters that affect the operation of the<br />
WAN/user ports, including SDLC ports. For the console, enter SE followed by PORT. For<br />
SNMP, select the ifwan category, which includes all variables affecting the WAN/user<br />
ports. For text-based configuration the [ifwan#] heading is used, where # represents the<br />
number of the port or channel.<br />
6.2.1 Configuring a Primary SDLC Port<br />
SE/PORT/#/P-<br />
SDLC example<br />
SE/SLOT/<br />
Channel/P-<br />
SDLC example<br />
Console SNMP Text-based Config<br />
SE/PORT ifwan (category) [ifwan#] (heading)<br />
A primary SDLC port (P-SDLC) connects to one or more PUs. When you define a data<br />
port as P-SDLC, the following port parameters are listed on the console:<br />
SDM-9230>SE<br />
SETUP<br />
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/<br />
PHONE/<br />
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/USER/VLAN,<br />
def:BRIDGE) ? PORT<br />
Port number (ETH1/ETH2/CSL/1,def:1) ?<br />
PORT 1> Protocol (def:HDLCOFR) ? P-SDLC<br />
PORT 1> Interface...............................DCE-V35<br />
PORT 1> Clocking mode (def:INTERNAL) ?<br />
PORT 1> Port speed (bps) (1200-6144000,def:56000) ?<br />
PORT 1> Fallback speed (def:ENABLE) ?<br />
PORT 1> CRC encoding (def:NRZ) ?<br />
PORT 1> Transmission start level (def:AUTO) ?<br />
PORT 1> Idle (def:FLAG) ?<br />
PORT 1> SDLC duplex mode (def:HALF) ?<br />
PORT 1> Group poll (def:NO) ?<br />
PORT 1> Group address (def:AE) ?<br />
PORT 1> Poll delay (ms) (0-1000,def:10) ?<br />
• Protocol, Interface, Clocking mode, Port speed (bps), Fallback speed, CRC<br />
encoding, Transmission start level and Idle are common to other legacy data<br />
ports, and are detailed in “SE/PORT Configuration Parameters” on page 12-1<br />
• The SDLC duplex mode, Group poll, Group address and Poll delay (ms) parameters<br />
set specific SNA/SDLC characteristics. For details, turn to “P-SDLC Port”<br />
on page 12-17.<br />
When you set a digital channel to P-SDLC, the following parameters are listed on the<br />
console:<br />
SDM-9230>SE<br />
SETUP<br />
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/<br />
6-8 Memotec Inc.
Change language