Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IPX Connections<br />
The six IP submenus control the following:<br />
• GLOBAL: configures the unit for general IPX routing characteristics (see next<br />
section)<br />
• FILTER: configures the parameters that define IPX SAP filtering (see “IPX SAP<br />
Filtering Parameters” on page 10-5).<br />
10.2.1 Global IPX Parameters<br />
SE/IPX/<br />
GLOBAL<br />
example<br />
To select global IPX parameters enter GLOBAL at the second Item prompt. The following<br />
parameters will be listed:<br />
SDM-9230>SE<br />
SETUP<br />
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/PHONE/<br />
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/USER/VLAN,<br />
def:BRIDGE) ? IPX<br />
Item (GLOBAL/FILTER,def:GLOBAL) ?<br />
IPX> Router (def:DISABLE) ? ENABLE<br />
IPX> Internal network number (def:00000000) ?<br />
The global IPX parameters are detailed in the section “SE/IPX/GLOBAL Parameters” on<br />
page 14-4.<br />
10.2.2 IPX SAP Filtering Parameters<br />
SE/IPX/FILTER<br />
example<br />
The Setup IPX menu includes a set of parameters that define IPX SAP filters. These filters<br />
permit greater control of SAP table entries, so that only the desired services are routed. For<br />
access to these parameters using SNMP, select the appropriate MIB variable from the<br />
ipxfilter group. To access these parameters from the console:<br />
1. Enter SE to execute the Setup command,<br />
2. Enter IPX at the Item prompt to select the IPX menu,<br />
3. Enter FILTERS (or an abbreviation of this term) at the second Item prompt to access<br />
the IPX Filter parameters.<br />
4. Select a specific filter entry (1 to 10) with the IPX Filter entry number parameter.<br />
5. Enable and define the filter with the Enable, SAP and Type parameters.<br />
SDM-9230>SE<br />
SETUP<br />
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/PHONE/<br />
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/USER/VLAN,<br />
def:BRIDGE) ? IPX<br />
Item (GLOBAL/FILTER,def:GLOBAL) ? FILTER<br />
IPX Filter entry number (1-10,def:1) ?<br />
IPX FILTER 1> Enable (def:DISABLE) ? ENABLE<br />
IPX FILTER 1> SAP (def:0000) ?<br />
IPX FILTER 1> Type (def:STANDARD) ?<br />
Details on these parameters are provided in the section “SE/IPX/FILTER Parameters” on<br />
page 14-7.<br />
Memotec Inc. 10-5
Change language