Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Legacy Data System Reference - Comtech EF Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Legacy</strong> <strong>Data</strong><br />
PORT 1> Port speed (bps) (1200-64000,def:56000) ?<br />
PORT 1> Fallback speed (def:ENABLE) ?<br />
PORT 1> Modem control signal (def:STATIC) ?<br />
PORT 1> Transmission start level (def:AUTO) ?<br />
PORT 1> Idle (def:MARK) ?<br />
PORT 1> Synchronization character (def:1616) ?<br />
PORT 1> Number of desynch. characters (1-100,def:3) ?<br />
PORT 1> Desynchronization character (def:FF) ?<br />
PORT 1> Remote unit (def:) ? CHICAGO-9230<br />
PORT 1> Class (def:3) ?<br />
PORT 1> Remote port number (1-65534,def:1) ?<br />
• Protocol, Interface, Clocking mode, Port speed (bps), Fallback speed, Modem<br />
control signal, Transmission start level, Idle, Remote unit, Class and Remote port<br />
number are common to other legacy data protocols, and are detailed in SE/PORT<br />
Configuration Parameters on page 1.<br />
• Synchronization character, Number of desynch. characters and Desynchronization<br />
character are unique to the COP protocol. Refer to COP Port on page 19 for<br />
details.<br />
8.2.2 COP on the Dual Serial Interface Card<br />
SE/SLOT/<br />
Channel/COP<br />
example<br />
When you define a serial port on the Dual Serial interface card with the COP protocol, the<br />
following parameters are listed on the console:<br />
SDM-9230>SE<br />
SETUP<br />
Item (BRIDGE/CALLER ID/CLASS/CUSTOM/FILTER/GLOBAL/HUNT/IP/IPX/MAP/<br />
PHONE/<br />
PORT/PU/PPPOE/PPPUSER/PVC/REDUNDANCY/SCHEDULE/SLOT/USER/VLAN,<br />
def:BRIDGE) ? SLOT<br />
SLOT> Slot number (1/2/3,def:2) ?<br />
SLOT> Channel Number (201-202/ALL,def:201) ? 202<br />
PORT 202> Protocol (def:OFF) ? COP<br />
PORT 202> Interface.............................DTE-V35<br />
PORT 202> Clocking mode (def:EXTERNAL) ?<br />
PORT 202> Modem control signal (def:STATIC) ?<br />
PORT 202> Transmission start level (def:AUTO) ?<br />
PORT 202> Idle (def:MARK) ?<br />
PORT 202> Synchronization character (def:1616) ?<br />
PORT 202> Number of desynch. characters (1-100,def:3) ?<br />
PORT 202> Desynchronization character (def:FF) ?<br />
PORT 202> Remote unit (def:) ?<br />
PORT 202> Class (def:3) ?<br />
PORT 202> Remote port number (1-65534,def:202) ?<br />
• These are the same parameters as those for a built-in serial port.<br />
Caution: The Dual Serial interface card for the SDM-9360, SDM-9380 and<br />
SDM-9585 does not support Fallback.<br />
8-4 Memotec Inc.