Samsung CLP-510 - User Manual_9.59 MB, pdf, ENGLISH

3
4
5
Property
Source
Type
Different
Source for
First Page
Description
Make sure that Source is set to the
corresponding paper tray.
Use the Manual source when printing to
special material. You have to load one sheet
at a time into the Multi-purpose Tray. See
page 3.9.
If the paper source is set to Auto Select,
the printer automatically picks up print
material in the following order: Multi-purpose
Tray, Tray1, Optional Tray2.
Make sure that Type is set to Plain Paper.
If you load a different type of print material,
select the corresponding paper type. For
more information on print material, refer to
Chapter 3, "Using Print Materials."
If you use 16lb to 24lb (60~90g/m 2 ) cotton
paper, such as Gilbert 25% and Gilbert 100%,
set the paper type to Cotton for best
printing.
To use recycled paper, select Recycled
Paper.
This property allows you to print the first
page using a different paper type from the
rest of the document. You can select the
paper source for the first page.
For example, load thick stock for the first
page into the Multi-purpose Tray, and plain
paper into Tray1. Then, select Tray1 in the
Source option and MP Tray in the
Different Source for First Page option.
6 Scaling
Scaling allows you to automatically or
manually scale your printer job on a page.
You can choose from None, Scale Printing,
and Fit to Page. For details, see page 5.4
and page 5.5.
4.8
PRINTING TASKS