ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.8 ERECTING THE REMAINING FRAMES<br />
Page 7.1-38<br />
Revision: 2<br />
August 2011<br />
<strong>ERECTION</strong> <strong>AND</strong> <strong>SAFETY</strong> <strong>MANUAL</strong><br />
The remaining frames are erected in like manner, initially with only a few purlins being installed in<br />
each bay, as shown below, working from one end of the building to the other. To lend overall rigidity<br />
to the structure, install fl ange braces to the purlins at specifi ed locations. All purlin, girt and eave<br />
strut<br />
connection bolts are left loose so that the entire skeleton frame work can be plumbed without undue<br />
diffi culty.The remaining purlins can be positioned on the rafter in each bay to facilitate the completion<br />
of the roof framing.<br />
NOTE:<br />
Always follow all OSHA safety recommendations. Safety fi rst!<br />
Technical information contained herein is subject to change without notice.
Change language