ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ERECTION</strong> <strong>AND</strong> <strong>SAFETY</strong> <strong>MANUAL</strong><br />
1.3 ANCHOR BOLT SETTINGS<br />
It is extremely important that anchor bolts be placed accurately in accordance with the anchor bolt setting<br />
plan. All anchor bolts should be held in place with a template or similar means, so that they will remain plumb<br />
and in the correct location during placing of the concrete. Check the concrete forms and anchor bolt locations<br />
prior to the pouring of the concrete. A fi nal check should be made after the completion of the concrete<br />
work and prior to the steel erection. This will allow any necessary corrections to be made before the costly<br />
erection labor and equipment arrives.<br />
B<br />
FORM<br />
BOARD<br />
TEMPLATE<br />
STAKE<br />
ANCHOR BOLTS<br />
C<br />
C<br />
PROJECTION ON ANCHOR BOLTS “D”<br />
GIVEN ON PLAN<br />
FORM BOARD<br />
DIMENSIONS A, B, <strong>AND</strong> C AS GIVEN<br />
ON ANCHOR BOLT SETTING PLAN<br />
Technical information contained herein is subject to change without notice. Page 7.1-5<br />
Revision: 2<br />
April 2011<br />
D<br />
A<br />
A
Change language