ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
ERECTION AND SAFETY MANUAL - Rigid Global Buildings
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ERECTION</strong> <strong>AND</strong> <strong>SAFETY</strong> <strong>MANUAL</strong><br />
Backlapping the panels 1 foot or 2 foot is routinely done to match panel coverage with the building width<br />
and length. On the sidewall this is done with the last panel installed. On the endwall this is normally done<br />
near the center and will be marked on the erection drawings.<br />
Page 7.1-58<br />
Revision: 2<br />
August 2011<br />
SIDEWALL<br />
ENDWALL<br />
NOTE:<br />
Always follow all OSHA safety recommendations. Remember, Safety fi rst!<br />
Technical information contained herein is subject to change without notice.