Owner's Manual for AVR-4310 - Audio Products Australia

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit
Button only on the remote control unit [BUTTON]
[ MAIN]
QUICK SELECT
[POWER ON]
[POWER OFF]
[INPUT
SOURCE
SELECT]
QUICK SELECT
Connecting the Power Cord
Wait until all connections have been completed before connecting the
power cord.
Connection to the AC outlet
• This outlet supply power to external
audio devices.
• Audio equipment with a total power
consumption of 100 W (0.43 A) can be
connected.
• The power supply turns on and off
together with . When
set to “ON”, power is supplied from
the outlet. When set to “STANDBY”, no
power is supplied.
Power cord
(included)
To household power
outlet
(AC 230 V, 50 Hz)
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlet to plug in audio devices. Do not use them
as power supplies for hairdryers or anything other than audio
equipment.
Once Connections are
Completed
Turning the Power On
1 Press
2 Press
3 Press
.
The power indicator lights red and the power is set to the
standby mode.
[MAIN] to switch the main remote control unit
to “MAIN” mode (vpage 86 “Operating the Main
Remote Control Unit”).
[POWER ON] or .
The power indicator fl ashes green and the power turns on.
ENGLISH
b Also press [INPUT SOURCE SELECT] or QUICK SELECT when in
standby mode, the power turns on.
When [INPUT SOURCE SELECT] has been pressed, the input
source set with the [INPUT SOURCE SELECT] is set. If a QUICK
SELECT has been pressed, the input source stored in the memory
for the quick select function is set (vpage 78 “Saving Frequently
Used Settings (Quick Select Function)”).
Turning the Power Off
1 Press
2 Press
3 Press
[MAIN] to switch the main remote control unit
to “MAIN” mode (vpage 86 “Operating the Main
Remote Control Unit”).
[POWER OFF] or .
The power is set to the standby mode.
.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press to turn off the power,
or unplug the power cord from the power outlet.
2
Getting Started Connections
Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications