Owner's Manual for AVR-4310 - Audio Products Australia

ENGLISH
Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications
4
Playing Components
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit
Button only on the remote control unit [BUTTON]
[ iPod]
[ NET/USB]
[1]
[SEARCH]
uiop
ENTER
[SOURCE
SELECT]
(MAIN mode)
[iPod]
(MAIN mode)
[SEARCH]
uip
ENTER
[SOURCE
SELECT]
b When no control dock for
iPod is connected, this
operation is also possible in
the “iPod” mode.
uiop
[TUNER]
[SHIFT]
ENTER
[ TUNER]
[A ~ G]
[TU d]
[TU f]
[MEMO]
[MODE]
[BAND]
[SEARCH]
uiop
[SOURCE
SELECT]
(MAIN mode)
[CHANNEL]
[1 ~ 8]
[TUNER]
(MAIN mode)
Sub remote control unit
Playing an iPod® Connected Directly to
the AVR-4310’s USB Port
• Music stored on an iPod can be played on the AVR-4310 when the
AVR-4310 and iPod are connected by USB cable.
• The AVR-4310 supports the audio on iPods of generations 5 and later
and iPod nano, iPod classic and iPod touch (not iPod shuffl e). For
some models, however, some of the functions may be restricted.
• The operation may not work properly if the iPod’s software is old. Be
sure to use the latest version of iPod software.
• With iPods, non-copyrighted material and material for which
duplication and playback is authorized by law can be duplicated and
played by individuals for their personal enjoyment. Infringement of
copyrights is prohibited by law.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using the AVR-4310
in conjunction with the iPod.
Listening to music on an iPod®
1 Connect
2
Turn
3
Press
the iPod® to the AVR-4310’s USB port using
the USB cable included with the iPod (vpage 20
“USB Port”).
the AVR-4310 power on.
(vpage 23 “Turning the Power On“)
[SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
DENON’s iPod
– GUI screen –
Playlistes
Artists
Albums
Songs
Podcasts
Genres
Composers
[1/9]
SEARCH Search
b When the iPod is connected directly to the USB port, menus under
“Music” are displayed.
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
b When no control dock for iPod is connected, this can also be
selected by pressing [iPod].
4 Set
the main remote control unit to the “NET/USB”
mode (vpage 86 “Operating the Main Remote
Control Unit”).
b When no control dock for iPod is connected, this operation is also
possible in the “iPod” mode.
5 Press
[SEARCH] and hold it down for a 2 seconds or
more to select the display mode.
b There are two modes for display the contents recorded on the
iPod.
Browse mode :
This is the mode for displaying the iPod information on the GUI
screen to operate the iPod. In this mode, you cannot perform
operations directly on the iPod itself.
z With the AVR-4310’s display, only English letters and numbers
and certain symbols can be displayed. Any characters that
cannot be displayed are replaced with “. (period)”.
Remote mode :
This is the mode for performing operations directly on the iPod
itself while watching the screen displayed on the iPod. In this
mode, the GUI screen is not displayed.
z “Remote iPod” appears on the main unit’s display.
b The Remote mode is not supported on 5th generation iPods or
iPod nanos.
6 Use
7 Press
Playable
files
Active
buttons
Display mode Browse mode Remote mode
Audio file S S
Picture file A A
Movie file A A z
Main remote
control unit
(AVR-4310)
S S
iPod ® A S
z : Only the sound is played.
ui to select the item, then press ENTER or p to
select the fi le to be played.
[1], ENTER or p.
Playback starts.