Owner's Manual for AVR-4310 - Audio Products Australia

ENGLISH
Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications
4
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit
Button only on the remote control unit [BUTTON]
PHONES jack
[ NET/USB]
[SEARCH]
uio p
ENTER
uiop
uiop
ENTER
Sub remote control unit
MASTER VOLUME
[SEARCH]
ENTER
[8]
[9]
[2] [1/3]
[REPEAT]
[RANDOM]
[8]
[ iPod]
[REPEAT]
[RANDOM]
[9]
[7]
[3]
[2]
[SEARCH]
uiop
ENTER
MASTER
VOLUME
[MUTE]
[6]
Operations During Playback
Use MASTER VOLUME to adjust the volume.
n
n
Adjusting the Master Volume
When the “Volume Display” setting (vpage 42) is
“Relative”
GAdjustable rangeH – – – –80.5dB ~ 18.0dB
When the “Volume Display” setting (vpage 42) is
“Absolute”
GAdjustable rangeH 0.0 ~ 99.0
b The adjustable range depends on the input signal, the channel
level settings, etc.
Turning Off the Sound Temporarily
(Muting)
Press [MUTE].
• The sound is reduced to the level set at “Mute Level” (vpage
42).
• To cancel, press [MUTE] again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
• To prevent hearing loss, do not raise the volume level excessively
when using headphones.
• Remove your headphones when performing Audyssey Auto Setup
or adjusting the speaker volume.
To Stop
During playback, either press and hold ENTER or press
[2].
Stopping Playback Temporarily
During playback, press ENTER, [3] or [1/3] on the sub
remote control unit.
Press again to resume playback.
Fast-forwarding or Fast-reversing
During playback, press and hold [6] (fast-reverse) or
[7] (fast-forward), or press and hold ui.
To Cue to the Beginning of a Track
During playback, either press [8] (to search for
previous tracks) or [9] (to search for subsequent
tracks), or press ui.
Playing Repeatedly
Press [REPEAT].
All : Repeat all songs.
One : Repeat the current song.
OFF : Disable repeat playback.
b GUI menu “Repeat” (vpage 50) can be set in the same way.
The repeat mode applies when playing tracks on the USB memory
device and on the media server.