DCC 6526L/6626L - TA Triumph-Adler GmbH

Use the procedure below to select the paper size and media type.
Function Menu: a b
*********************
1 Paper Selection g
2 Collate T
3 Duplex T
[ Exit ]
Paper Selection: a b
*********************
1 * Auto
2 A A4a Plain
3 B A5a Plain
MP Tray Set.: a b
*********************
1 *Standard Size
2 Size Entry
Size Entry(Y): D b
(5.83 - 14.02)
x ****** 11.49 "
Media Type: a b
*********************
1 *Plain
2 Transparency
3 Rough
4-6
1 Press the Copy key.
Copying Functions
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the or key to select [Paper Selection].
5 Press the OK key. Paper Selection appears.
6 Press the or key to select [MP Tray Set.].
7 Press the OK key. MP Tray Set. appears.
8 Press the or key to select [Standard Size] or
[Size Entry] and press the OK key, select the
desired paper size, and then press the OK key.
If you select [Size Entry], using the numeric keys to
enter the Y (vertical) size and press the OK key,
and then enter the X (horizontal) size and press the
OK key.
9 Press the or key to select the desired paper
type and then press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.