DCC 6526L/6626L - TA Triumph-Adler GmbH

IPP Select whether or not to use
IPP, and the number of the
port to be used.
Use the procedure below.
Item Description Default Setting
IPP over SSL Select whether or not to use
IPP over SSL.
SSL must be set to [On] in
SSL Setting on page 8-160.
ThinPrint Select whether or not to use
ThinPrint.
ThinPrintOverSSL Select whether or not to use
ThinPrintOverSSL.
SSL must be set to [On] in
SSL Setting on page 8-160.
8-158
Off
Port number: 631
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the or key to select [Network Setting].
On
On
On
* : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Restarting the
System*