DCC 6526L/6626L - TA Triumph-Adler GmbH

CR Action
Printer: a b
*********************
1 Emulation Set.
2 EcoPrint
3 Override A4/LTR
[ Exit ]
LF Action: M b
*********************
1 *LF Only
2 LF and CR
3 Ignore LF
8-91
Default Setting (System Menu)
2 Press the OK key. The Printer menu appears.
3 Press the or key to select [LF Action].
4 Press the OK key. LF Action appears.
5 Press the or key to select [LF Only], [LF and
CR] or [Ignore LF].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings. The default setting is CR Only.
Use the procedure below to specify a CR action.
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
Sys. Menu/Count.:a b
7 Copy
*********************
8 Printer
9 Send
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or
key to select [Printer].
8