DCC 6526L/6626L - TA Triumph-Adler GmbH

Symptom Checkpoints Corrective Actions
Printouts are wrinkled
or curled.
Is the paper curled, folded or
wrinkled?
Are there any loose scraps or
jammed paper in the
machine?
10-4
Troubleshooting
Replace the paper with new paper. 2-26
Remove any jammed paper. 10-16
Is the paper damp? Replace the paper with new paper. 2-26
Cannot print. Is the machine plugged in? Plug the power cord into an AC
outlet.
—
Is the machine powered on? Turn on the main power switch. 2-7
Documents are
printed improperly.
Cannot print with USB
memory.
When displaying an
image sent from the
machine on the PC, an
image size is shrunk
vertically or
horizontally.
USB memory not
recognized.
Is the printer cable or
network cable connected?
Was the machine powered
on before the printer cable
was connected?
Connect the correct printer cable or
network cable securely.
Power on the machine after
connecting the printer cable.
Is the print job paused? Press [Resume] (the Left Select
key) to resume printing.
Are the application software
settings at the PC set
properly?
Check that the Printing System
Driver and application software
settings are set properly.
Is the USB host blocked? Select [Unblock] in the USB host
settings.
— Check that the USB memory is
securely plugged into the machine.
Have you selected
200×100dpi Normal or
200×400dpi Super Fine for
the scan resolution?
Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super Fine when sending an
image.
— Check that the USB memory is
securely plugged into the machine.
Is the USB host blocked? Select [Unblock] in the USB host
settings.
Skewed-color printout — Conduct color registration using
the operation panel.
Conduct color calibration using the
operation panel.
Reference
Page
2-5
2-5
2-7
7-18
—
8-168
—
5-18
—
8-168
8-104
8-104