DCC 6526L/6626L - TA Triumph-Adler GmbH

Function Defaults
8-29
Default Setting (System Menu)
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
Orig.Orientation
Set the original orientation defaults. The available default settings are shown below.
Refer to page 4-8 for Original Orientation.
Item Description
c Top Edge Top Select the original's top edge at the top.
d Top Edge Left Select the original's top edge at the left.
Use the procedure below to select the default orientation when originals are placed on the platen.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
6 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
Function Default: a b
*********************
1 Color Selection
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the or key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the or key to select [Orig.Orientation].
8