DCC 6526L/6626L - TA Triumph-Adler GmbH

Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE: Refer to page 3-20 for Collate/Offset.
Item Description
Collate Off Collate not performed.
On Collate performed.
Use the procedure below to set the default Collate/Offset settings.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
6 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
Function Default: a b
*********************
1 Color Selection
2 Scan Resolution
3 FAX Resolution
[ Exit ]
Collate: a b
1 Off
*********************
2 *On
8-42
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the or key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the or key to select [Collate].
6 Press the OK key. Collate appears.
7 Press the or key to select [Off] or [On].