DCC 6526L/6626L - TA Triumph-Adler GmbH

More documents

Recommendations

Info

Use the procedure below to setup the TCP/IP (IPv4) setting. Login User Name: L b ******************** Login Password: [ Login ] Sys. Menu/Count.: a b 1 Report 2 Counter ********************* 3 System [ Exit ] Administrator only. System: a b ********************* 1 Network Setting 2 I/F Block Set. 3 Security Level [ Exit ] Network Setting: a b ********************* 1 TCP/IP Settings 2 NetWare 3 AppleTalk [ Exit ] 2-17 Preparation before Use 1 Press the System Menu/Counter key on the main unit operation panel. When you are performing user management and have not logged in, a login screen will appear. Then, enter the Login User Name and Login Password to log in. NOTE: Refer to Character Entry Method on Appendix-8 for details on entering characters. 2 In the Sys. Menu/Count. menu, press the or key to select [System], and then press the OK key. IMPOR<strong>TA</strong>NT: To make the settings, you must have logged in using a Login User Name with administrator privileges. The default settings of the Login User Name and Login Password are both "2600". If you have logged in using a Login User Name without administrator privileges, the screen will display Administrator only. and return to the standby screen. 3 In the System menu, press the or key to select [Network Setting]. 4 Press the OK key. The Network Setting menu appears. 5 Press the or key to select [TCP/IP Settings]. 2
TCP/IP Settings: a b ********************* 1 TCP/IP 2 IPv4 Setting 3 IPv6 Setting [ Exit ] TCP/IP: a b 1 Off 2 ********************* *On TCP/IP Settings: 1 TCP/IP a b ********************* 2 IPv4 Setting 3 IPv6 Setting [ Exit ] IPv4 Setting: a b ********************* 1 DHCP 2 Bonjour 3 Auto-IP [ Exit ] DHCP: a b 1 Off 2 ********************* *On 2-18 Preparation before Use 6 Press the OK key. The TCP/IP Settings menu appears. 7 Press the or key to select [TCP/IP]. 8 Press the OK key. TCP/IP appears. 9 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the TCP/IP Settings menu. 10 Press the or key to select [IPv4 Setting]. 11 Press the OK key. The IPv4 Setting menu appears. 12 Press the or key to select [DHCP]. 13 Press the OK key. DHCP appears. 14 Press the or key to select [Off] and then press the OK key.
Page 1:
DCC 6526L/6626L User Manual DCC 652
Page 4 and 5:
Safety Conventions in This Guide Th
Page 6 and 7:
iii Contents Print Override . . . .
Page 8 and 9:
Quick Guide To make copies To print
Page 10 and 11:
To send a FAX (Only on products wit
Page 12 and 13: ix Subject Entry (page 5-22) JobFin
Page 14 and 15: Status/Job Cancel key Print Job Sta
Page 16 and 17: User/Job Account xiii Host Name IPP
Page 18 and 19: xv Custom PaperSize Cassette 2 Set.
Page 20 and 21: Login Operation Optional Memory RAM
Page 22 and 23: Edit Destination Address Book Adjus
Page 24 and 25: Environment The service environment
Page 26 and 27: Other precautions Return the exhaus
Page 28 and 29: Legal Restriction on Copying/Scanni
Page 30 and 31: Legal and Safety Information Please
Page 32 and 33: GPL/LGPL This product contains GPL
Page 34 and 35: Monotype Imaging License Agreement
Page 36 and 37: About this Operation Guide This Ope
Page 38 and 39: Conventions in This Guide The follo
Page 40 and 41: 1 Part Names This chapter identifie
Page 42 and 43: Used to select a menu item, move th
Page 44 and 45: 20 Fuser Cover 21 Paper Transfer Un
Page 46 and 47: 2 Preparation before Use This chapt
Page 48 and 49: Determining the Connection Method a
Page 50 and 51: Connecting Cables Follow the steps
Page 52 and 53: Power On/Off Power On When the main
Page 54 and 55: Sleep and Auto Sleep Sleep Auto Sle
Page 56 and 57: Setting Date and Time Follow the st
Page 58 and 59: Date Setting: a b *****************
Page 60 and 61: System: a b ********************* 1
Page 64 and 65: IPv4 Setting: 1 DHCP a b **********
Page 66 and 67: IPv4 Setting: 3 IP Address 4 Subnet
Page 68 and 69: Embedded Web Server (Settings for E
Page 70 and 71: 2 Enter the correct settings in eac
Page 72 and 73: Loading Paper in the Cassettes The
Page 74 and 75: 2-29 Preparation before Use 6 Inser
Page 76 and 77: 2-31 Preparation before Use 3 Adjus
Page 78 and 79: 2-33 Preparation before Use 3 Adjus
Page 80 and 81: Paper stopper To use the sheet ejec
Page 82 and 83: *** To change to a media type other
Page 84 and 85: 2-39 Preparation before Use When th
Page 86 and 87: Cassette 1 Type: a b **************
Page 88 and 89: MP Tray Size: a b *****************
Page 90 and 91: Loading Originals in the Document P
Page 92 and 93: Installing Printing System Driver 2
Page 94 and 95: Custom Mode 2-49 Preparation before
Page 96 and 97: 2-51 Preparation before Use 7 Choos
Page 98 and 99: Setting TWAIN Driver Register this
Page 100 and 101: 2-55 Preparation before Use 2 Selec
Page 102 and 103: 3 Basic Operation This chapter expl
Page 104 and 105: One-Touch Keys and Program Keys The
Page 106 and 107: Changing and Deleting Settings Reca
Page 108 and 109: Copying Follow the steps as below f
Page 110 and 111: Adjusting Density Use this procedur
Page 112 and 113:
Selecting Image Quality Select imag
Page 114 and 115:
Zoom Copying 3-13 Basic Operation A
Page 116 and 117:
Standard Zoom: a b ****************
Page 118 and 119:
Two-sided to Two-sided Original Cop
Page 120 and 121:
Scanning... Job No.: 9999 Page(s):
Page 122 and 123:
3-21 Basic Operation 5 Press the OK
Page 124 and 125:
3-23 Basic Operation 6 Select the B
Page 126 and 127:
Sending 3-25 Basic Operation This m
Page 128 and 129:
Ready to send. Dest.: 1 p :sally@of
Page 130 and 131:
Host Name(SMB): A b Osaka SD* ABC [
Page 132 and 133:
Dest. Confirm.: a b p Morgan@office
Page 134 and 135:
3-33 Basic Operation 2 At the Comma
Page 136 and 137:
3-35 Basic Operation In Windows XP,
Page 138 and 139:
Checking the [Path] 3-37 Basic Oper
Page 140 and 141:
Configuring Windows Firewall (for W
Page 142 and 143:
3-41 Basic Operation 6 Select TCP,
Page 144 and 145:
Confirm Destination Screen 3-43 Bas
Page 146 and 147:
Destination Search Destinations reg
Page 148 and 149:
Sending to Different Types of Desti
Page 150 and 151:
Original Configurations Send Config
Page 152 and 153:
Checking Remaining Toner and Paper
Page 154 and 155:
4 Copying Functions This chapter ex
Page 156 and 157:
Original Size: a b ****************
Page 158 and 159:
Selecting the Multi Purpose Tray Ch
Page 160 and 161:
4-7 10 Place paper in the multi pur
Page 162 and 163:
Use the procedure below to select t
Page 164 and 165:
Combine Mode 4-11 Copying Functions
Page 166 and 167:
Function Menu: a b ****************
Page 168 and 169:
Job Finish Notice 4-15 Copying Func
Page 170 and 171:
File Name Entry 4-17 Copying Functi
Page 172 and 173:
Color Selection 4-19 Copying Functi
Page 174 and 175:
4-21 Copying Functions 10 Press the
Page 176 and 177:
Background Density Lightens the bac
Page 178 and 179:
Saturation Adjust the color saturat
Page 180 and 181:
5 Sending Functions This chapter ex
Page 182 and 183:
Original Size: a b ****************
Page 184 and 185:
Page 186 and 187:
Zoom: a b ********************* 1 *
Page 188 and 189:
5-9 Sending Functions 6 Press the
Page 190 and 191:
Orig.Orientation: a b 1 c Top Edge
Page 192 and 193:
Page 194 and 195:
Original Image Select image quality
Page 196 and 197:
Page 198 and 199:
Color / Grayscale / Black and White
Page 200 and 201:
File Name Entry 5-21 Sending Functi
Page 202 and 203:
Sharpness 5-23 Sending Functions Ad
Page 204 and 205:
Page 206 and 207:
Select Computer: a b **************
Page 208 and 209:
Address Entry: A b ******@abcdefg.j
Page 210 and 211:
Scanning Image using Application 5-
Page 212 and 213:
6 Document Box This chapter explain
Page 214 and 215:
JPEG/TIFF Print USB Memory: N Store
Page 216 and 217:
Saving Documents to USB Memory (Sca
Page 218 and 219:
Removing USB Memory Remove the USB
Page 220 and 221:
l Fiala: a b *********************
Page 222 and 223:
l Fiala: a b *********************
Page 224 and 225:
7 Status / Job Cancel This chapter
Page 226 and 227:
0009 Detail: C b Status: 1/9 Proces
Page 228 and 229:
When complete job name not displaye
Page 230 and 231:
Page 232 and 233:
Print Job Log: a b 0006 maury’s d
Page 234 and 235:
Page 236 and 237:
Sending the Job Log History 7-13 St
Page 238 and 239:
Registering Destination Dest. Confi
Page 240 and 241:
Setting E-mail Subject Job Log Hist
Page 242 and 243:
Device/Communication 7-19 Status /
Page 244 and 245:
USB keyboard USB memory can be safe
Page 246 and 247:
8 Default Setting (System Menu) Thi
Page 248 and 249:
Switching the Language for Display
Page 250 and 251:
Default Screen Select the screen ap
Page 252 and 253:
Display Bright. Set the brightness
Page 254 and 255:
Size Entry(Y): D b (1.97 - 8.50) x
Page 256 and 257:
Adding a Custom Size and Media Type
Page 258 and 259:
Paper Size and Media Type Setup for
Page 260 and 261:
Paper Size and Media Type Setup for
Page 262 and 263:
Paper Weight 8-17 Default Setting (
Page 264 and 265:
Plain: a b ********************* 1
Page 266 and 267:
Default Paper Source Select the def
Page 268 and 269:
Special Paper Action 8-23 Default S
Page 270 and 271:
Preset Limit Restrict the number of
Page 272 and 273:
Error Handling 8-27 Default Setting
Page 274 and 275:
Function Defaults 8-29 Default Sett
Page 276 and 277:
Original Image Continuous Scan: a b
Page 278 and 279:
Color Selection 8-33 Default Settin
Page 280 and 281:
Copy: a b ********************* 1 *
Page 282 and 283:
Density File Format: a b **********
Page 284 and 285:
File Name Entry Zoom: a b *********
Page 286 and 287:
Common Settings: a b **************
Page 288 and 289:
EcoPrint 8-43 Default Setting (Syst
Page 290 and 291:
XPS FitTo Page Function Default: a
Page 292 and 293:
2 in 1 Layout File Separation: a b
Page 294 and 295:
Page 296 and 297:
Orig. Binding Border Line: a b ****
Page 298 and 299:
Finish Binding 8-53 Default Setting
Page 300 and 301:
Color TIFF Comp. Detail Setting: a
Page 302 and 303:
Page 304 and 305:
Optional Memory 8-59 Default Settin
Page 306 and 307:
Restart. Are you sure? [ Yes ] [ No
Page 308 and 309:
Paper Selection Photo Processing:a
Page 310 and 311:
Auto % Priority AutoPaperSelect.:a
Page 312 and 313:
8-67 Default Setting (System Menu)
Page 314 and 315:
Select Key Set.: a b **************
Page 316 and 317:
Use the procedure below to set Sele
Page 318 and 319:
Check beforeSend:a b **************
Page 320 and 321:
• Sharpness • Backgrnd Density
Page 322 and 323:
Job Retention Deletion Quick Copy J
Page 324 and 325:
Printer Settings 8-79 Default Setti
Page 326 and 327:
When KPDL(Auto) Is Selected for Emu
Page 328 and 329:
Override A4/LTR Printer: a b ******
Page 330 and 331:
Copies Printer: a b ***************
Page 332 and 333:
Orientation Set the default orienta
Page 334 and 335:
Wide A4 8-89 Default Setting (Syste
Page 336 and 337:
CR Action Printer: a b ************
Page 338 and 339:
Paper Feed Mode Print Offset(V): D
Page 340 and 341:
Printing Reports/Sending Notice 8-9
Page 342 and 343:
Page 344 and 345:
Send Result Report 8-99 Default Set
Page 346 and 347:
Adjustment/Maintenance Adjust print
Page 348 and 349:
AutoColorCorrect Manual: a b 3 -1 *
Page 350 and 351:
Page 352 and 353:
Detailed Settings Normal: a b *****
Page 354 and 355:
Detail: a b ********************* 1
Page 356 and 357:
Correct. Bk Line 8-111 Default Sett
Page 358 and 359:
Service Setting: a b **************
Page 360 and 361:
Service Setting: a b **************
Page 362 and 363:
Date/Timer Date/Timer settings incl
Page 364 and 365:
Date Format 8-119 Default Setting (
Page 366 and 367:
Summer Time Time Zone: a b ********
Page 368 and 369:
Error Clear Timer Sys. Menu/Count.:
Page 370 and 371:
Sleep Timer 8-125 Default Setting (
Page 372 and 373:
Login User Name: L b **************
Page 374 and 375:
Panel Reset Timer Timer Setting: a
Page 376 and 377:
Page 378 and 379:
Editing Destination (Address Book/A
Page 380 and 381:
Entering E-mail Address Entering Fo
Page 382 and 383:
Path: A b SD3\report* ABC [ Text ]
Page 384 and 385:
Adding a Group 8-139 Default Settin
Page 386 and 387:
Entering Group Member Detail: C b G
Page 388 and 389:
Editing a Destination Detail: C b A
Page 390 and 391:
Adding a Destination on One-touch K
Page 392 and 393:
Overwrite. Are you sure? z No. 1 [
Page 394 and 395:
Network Setup The following network
Page 396 and 397:
NetWare Setup System: a b *********
Page 398 and 399:
AppleTalk Setup 8-153 Ether-II 802.
Page 400 and 401:
WSD Print Setup WSD-SCAN: a b *****
Page 402 and 403:
Protocol Detail Make other network
Page 404 and 405:
Network Setting: a b **************
Page 406 and 407:
IPP Security Network Setting: a b *
Page 408 and 409:
Sys. Menu/Count.:a b 1 Report 2 Cou
Page 410 and 411:
SNMPv3 Setting Secure Protocol: a b
Page 412 and 413:
Rule Setting: a b *****************
Page 414 and 415:
USB Host: a b *********************
Page 416 and 417:
Optional interface (Optional interf
Page 418 and 419:
Security Level (Security Level sett
Page 420 and 421:
9 Maintenance This chapter describe
Page 422 and 423:
Cleaning the paper transfer unit 9-
Page 424 and 425:
9-5 Maintenance 4 Make sure the rel
Page 426 and 427:
New Waste Toner Box 9-7 4 Open the
Page 428 and 429:
10 Troubleshooting This chapter exp
Page 430 and 431:
Symptom Checkpoints Corrective Acti
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Error Message Checkpoints Correctiv
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Online Help Messages 10-17 Troubles
Page 446 and 447:
Paper jam in the paper feeder 10-19
Page 448 and 449:
10-21 Troubleshooting 2 Open the le
Page 450 and 451:
11 Management This chapter explains
Page 452 and 453:
Sys. Menu/Count.:a b **************
Page 454 and 455:
Login/Logout 11-5 Management Once y
Page 456 and 457:
User Login Set.: a b 1 User Login *
Page 458 and 459:
Changing user information User/Job
Page 460 and 461:
Group Auth.: a b ******************
Page 462 and 463:
Job Accounting 11-13 Management Job
Page 464 and 465:
Login/Logout If job accounting is e
Page 466 and 467:
Managing Accounts Menu: a b 1 Detai
Page 468 and 469:
Overwrite. Are you sure? z k Osaka
Page 470 and 471:
Restriction Items [Split] selected
Page 472 and 473:
Applying Limit of Restriction Limit
Page 474 and 475:
Default Counter Limit When you add
Page 476 and 477:
Counting the Number of Pages Printe
Page 478 and 479:
User/Job Account:a b 1 User Login S
Page 480 and 481:
Printing an Accounting Report Total
Page 482 and 483:
Checking the Counter You can check
Page 484 and 485:
Appendix • Optional Equipment....
Page 486 and 487:
Precautions for Handling the Memory
Page 488 and 489:
Optional Function You can use the o
Page 490 and 491:
System: a b ********************* 1
Page 492 and 493:
Selecting Type of Characters To ent
Page 494 and 495:
Characters associated with differen
Page 496 and 497:
Supported types Supported paper siz
Page 498 and 499:
Choosing the Appropriate Paper This
Page 500 and 501:
Curl: Most paper naturally tends to
Page 502 and 503:
Envelopes Envelopes should always b
Page 504 and 505:
Coated Paper Coated paper is create
Page 506 and 507:
Sharpness adjustment Adjust the sha
Page 508 and 509:
Paper Capacity Cassette 1 250 sheet
Page 510 and 511:
Scanner Item Description Operating
Page 512 and 513:
Glossary AppleTalk AppleTalk, which
Page 514 and 515:
NetWare Novell's network management
Page 516 and 517:
Index Numerics 1-sided/2-sided Sele
Page 518 and 519:
J Job Available Status 7-2 Cancelin
Page 520 and 521:
Sending Size Selection 5-4 Setup 8-
Page 525 and 526:
First edition 2011.4 2MAKMEN000
show all

DCC 6526L/6626L - TA Triumph-Adler GmbH

Create successful ePaper yourself

Delete template?

Save as template?