02.06.2013 Views

DCC 6526L/6626L - TA Triumph-Adler GmbH

DCC 6526L/6626L - TA Triumph-Adler GmbH

DCC 6526L/6626L - TA Triumph-Adler GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Send Result Report<br />

8-99<br />

Default Setting (System Menu)<br />

Automatically print a report of transmission result when a transmission is complete. The table below shows the<br />

available settings. The default setting is Error Only.<br />

Use the procedure below to send a Result Report.<br />

Item Description<br />

Off No result report printed.<br />

On Result report automatically printed.<br />

Transmitted images can also be attached.<br />

Error Only Result report printed only when a<br />

transmission ends in an error. If two or<br />

more destinations are registered, the<br />

reports are printed only for the destinations<br />

with the errors. Transmitted images can<br />

also be attached.<br />

Sys. Menu/Count.:a b<br />

*********************<br />

1 Report<br />

2 Counter<br />

3 System<br />

[ Exit ]<br />

Report: a b<br />

*********************<br />

1 Report Print<br />

2 Admin Rpt Set.<br />

3 Result Rpt Set.<br />

[ Exit ]<br />

Result Rpt Set.: a b<br />

*********************<br />

1 Send Result<br />

2 FAX RX Result<br />

3 JobFinish Notice<br />

[ Exit ]<br />

1 In the Sys. Menu/Count. menu, press the or <br />

key to select [Report].<br />

2 Press the OK key. The Report menu appears.<br />

3 Press the or key to select [Result Rpt Set.].<br />

4 Press the OK key. The Result Rpt Set. menu<br />

appears.<br />

8

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!