DCC 6526L/6626L - TA Triumph-Adler GmbH

Adding a Group
8-139
Default Setting (System Menu)
Compile two or more individuals into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 20 groups can be added in the Address Book.
NOTE: If user login administration is enabled, you can only edit destinations in the Address Book by logging
in with administrator privileges.
Before adding a group in the Address Book, the individuals to be included in the group must be added first.Up
to 100 destinations can be added as the addresses. Among them, one destination can be assigned for a FTP
or SMB address. The available addresses will then be 99 in total for email and/or fax addresses. For example,
you can add 75 email addresses, 24 fax addresses, and a FTP address.
Use the procedure below to register a group.
Sys. Menu/Count.:a b
; Document Box
*********************
< Edit Destination
= Adjust/Maint.
[ Exit ]
Edit Destination:a b
*********************
1 Addressbook
2 Print List
[ Exit ]
Addressbook: a b
*********************
k Design
l Fiala
l Maury
[ Menu ]
Menu: a b
1 Detail/Edit
2 Delete
*********************
3 Add Address
1 In the Sys. Menu/Count. menu, press the or
key to select [Edit Destination].
2 Press the OK key. The Edit Destination menu
appears.
3 Press the or key to select [Address Book].
4 Press the OK key. The Address Book list screen
appears.
5 Press [Menu] (the Right Select key). Menu
appears.
6 Press the or key to select [Add Address].
8