DCC 6526L/6626L - TA Triumph-Adler GmbH

More documents

Recommendations

Info

System: a b ********************* 1 Network Setting 2 I/F Block Set. 3 Security Level [ Exit ] Network Setting: a b ********************* 1 TCP/IP Settings 2 NetWare 3 AppleTalk [ Exit ] TCP/IP Settings: a b ********************* 1 TCP/IP 2 IPv4 Setting 3 IPv6 Setting [ Exit ] TCP/IP: a b 1 Off 2 ********************* *On TCP/IP Settings: 1 TCP/IP a b ********************* 2 IPv4 Setting 3 IPv6 Setting [ Exit ] 2-15 Preparation before Use 3 In the System menu, press the or key to select [Network Setting]. 4 Press the OK key. The Network Setting menu appears. 5 Press the or key to select [TCP/IP Settings]. 6 Press the OK key. The TCP/IP Settings menu appears. 7 Press the or key to select [TCP/IP]. 8 Press the OK key. TCP/IP appears. 9 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the TCP/IP Settings menu. 10 Press the or key to select [IPv4 Setting]. 2
IPv4 Setting: a b ********************* 1 DHCP 2 Bonjour 3 Auto-IP [ Exit ] DHCP: a b 1 Off 2 ********************* *On IPv4 Setting: 1 DHCP 2 Bonjour a b ********************* 3 Auto-IP [ Exit ] Auto-IP: a b 1 Off 2 ********************* *On TCP/IP (IPv4) Setup (by Entering IP Addresses) 2-16 Preparation before Use 11 Press the OK key. The IPv4 Setting menu appears. 12 Press the or key to select [DHCP]. 13 Press the OK key. DHCP appears. 14 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. 15 Press the or key to select [Auto-IP]. 16 Press the OK key. Auto-IP appears. 17 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway addresses. The default settings are "TCP/IP Protocol: On, DHCP: On, Bonjour: Off, Auto-IP: On". NOTE: Before setting an IP address, ask your network administrator if your network environment requires input of an IP address. If input is necessary, ask your network administrator to obtain an IP address for you.
Page 1:
DCC 6526L/6626L User Manual DCC 652
Page 4 and 5:
Safety Conventions in This Guide Th
Page 6 and 7:
iii Contents Print Override . . . .
Page 8 and 9:
Quick Guide To make copies To print
Page 10 and 11: To send a FAX (Only on products wit
Page 12 and 13: ix Subject Entry (page 5-22) JobFin
Page 14 and 15: Status/Job Cancel key Print Job Sta
Page 16 and 17: User/Job Account xiii Host Name IPP
Page 18 and 19: xv Custom PaperSize Cassette 2 Set.
Page 20 and 21: Login Operation Optional Memory RAM
Page 22 and 23: Edit Destination Address Book Adjus
Page 24 and 25: Environment The service environment
Page 26 and 27: Other precautions Return the exhaus
Page 28 and 29: Legal Restriction on Copying/Scanni
Page 30 and 31: Legal and Safety Information Please
Page 32 and 33: GPL/LGPL This product contains GPL
Page 34 and 35: Monotype Imaging License Agreement
Page 36 and 37: About this Operation Guide This Ope
Page 38 and 39: Conventions in This Guide The follo
Page 40 and 41: 1 Part Names This chapter identifie
Page 42 and 43: Used to select a menu item, move th
Page 44 and 45: 20 Fuser Cover 21 Paper Transfer Un
Page 46 and 47: 2 Preparation before Use This chapt
Page 48 and 49: Determining the Connection Method a
Page 50 and 51: Connecting Cables Follow the steps
Page 52 and 53: Power On/Off Power On When the main
Page 54 and 55: Sleep and Auto Sleep Sleep Auto Sle
Page 56 and 57: Setting Date and Time Follow the st
Page 58 and 59: Date Setting: a b *****************
Page 62 and 63: Use the procedure below to setup th
Page 64 and 65: IPv4 Setting: 1 DHCP a b **********
Page 66 and 67: IPv4 Setting: 3 IP Address 4 Subnet
Page 68 and 69: Embedded Web Server (Settings for E
Page 70 and 71: 2 Enter the correct settings in eac
Page 72 and 73: Loading Paper in the Cassettes The
Page 74 and 75: 2-29 Preparation before Use 6 Inser
Page 76 and 77: 2-31 Preparation before Use 3 Adjus
Page 78 and 79: 2-33 Preparation before Use 3 Adjus
Page 80 and 81: Paper stopper To use the sheet ejec
Page 82 and 83: *** To change to a media type other
Page 84 and 85: 2-39 Preparation before Use When th
Page 86 and 87: Cassette 1 Type: a b **************
Page 88 and 89: MP Tray Size: a b *****************
Page 90 and 91: Loading Originals in the Document P
Page 92 and 93: Installing Printing System Driver 2
Page 94 and 95: Custom Mode 2-49 Preparation before
Page 96 and 97: 2-51 Preparation before Use 7 Choos
Page 98 and 99: Setting TWAIN Driver Register this
Page 100 and 101: 2-55 Preparation before Use 2 Selec
Page 102 and 103: 3 Basic Operation This chapter expl
Page 104 and 105: One-Touch Keys and Program Keys The
Page 106 and 107: Changing and Deleting Settings Reca
Page 108 and 109: Copying Follow the steps as below f
Page 110 and 111:
Adjusting Density Use this procedur
Page 112 and 113:
Selecting Image Quality Select imag
Page 114 and 115:
Zoom Copying 3-13 Basic Operation A
Page 116 and 117:
Standard Zoom: a b ****************
Page 118 and 119:
Two-sided to Two-sided Original Cop
Page 120 and 121:
Scanning... Job No.: 9999 Page(s):
Page 122 and 123:
3-21 Basic Operation 5 Press the OK
Page 124 and 125:
3-23 Basic Operation 6 Select the B
Page 126 and 127:
Sending 3-25 Basic Operation This m
Page 128 and 129:
Ready to send. Dest.: 1 p :sally@of
Page 130 and 131:
Host Name(SMB): A b Osaka SD* ABC [
Page 132 and 133:
Dest. Confirm.: a b p Morgan@office
Page 134 and 135:
3-33 Basic Operation 2 At the Comma
Page 136 and 137:
3-35 Basic Operation In Windows XP,
Page 138 and 139:
Checking the [Path] 3-37 Basic Oper
Page 140 and 141:
Configuring Windows Firewall (for W
Page 142 and 143:
3-41 Basic Operation 6 Select TCP,
Page 144 and 145:
Confirm Destination Screen 3-43 Bas
Page 146 and 147:
Destination Search Destinations reg
Page 148 and 149:
Sending to Different Types of Desti
Page 150 and 151:
Original Configurations Send Config
Page 152 and 153:
Checking Remaining Toner and Paper
Page 154 and 155:
4 Copying Functions This chapter ex
Page 156 and 157:
Original Size: a b ****************
Page 158 and 159:
Selecting the Multi Purpose Tray Ch
Page 160 and 161:
4-7 10 Place paper in the multi pur
Page 162 and 163:
Use the procedure below to select t
Page 164 and 165:
Combine Mode 4-11 Copying Functions
Page 166 and 167:
Function Menu: a b ****************
Page 168 and 169:
Job Finish Notice 4-15 Copying Func
Page 170 and 171:
File Name Entry 4-17 Copying Functi
Page 172 and 173:
Color Selection 4-19 Copying Functi
Page 174 and 175:
4-21 Copying Functions 10 Press the
Page 176 and 177:
Background Density Lightens the bac
Page 178 and 179:
Saturation Adjust the color saturat
Page 180 and 181:
5 Sending Functions This chapter ex
Page 182 and 183:
Original Size: a b ****************
Page 184 and 185:
Page 186 and 187:
Zoom: a b ********************* 1 *
Page 188 and 189:
5-9 Sending Functions 6 Press the
Page 190 and 191:
Orig.Orientation: a b 1 c Top Edge
Page 192 and 193:
Page 194 and 195:
Original Image Select image quality
Page 196 and 197:
Page 198 and 199:
Color / Grayscale / Black and White
Page 200 and 201:
File Name Entry 5-21 Sending Functi
Page 202 and 203:
Sharpness 5-23 Sending Functions Ad
Page 204 and 205:
Page 206 and 207:
Select Computer: a b **************
Page 208 and 209:
Address Entry: A b ******@abcdefg.j
Page 210 and 211:
Scanning Image using Application 5-
Page 212 and 213:
6 Document Box This chapter explain
Page 214 and 215:
JPEG/TIFF Print USB Memory: N Store
Page 216 and 217:
Saving Documents to USB Memory (Sca
Page 218 and 219:
Removing USB Memory Remove the USB
Page 220 and 221:
l Fiala: a b *********************
Page 222 and 223:
l Fiala: a b *********************
Page 224 and 225:
7 Status / Job Cancel This chapter
Page 226 and 227:
0009 Detail: C b Status: 1/9 Proces
Page 228 and 229:
When complete job name not displaye
Page 230 and 231:
Page 232 and 233:
Print Job Log: a b 0006 maury’s d
Page 234 and 235:
Page 236 and 237:
Sending the Job Log History 7-13 St
Page 238 and 239:
Registering Destination Dest. Confi
Page 240 and 241:
Setting E-mail Subject Job Log Hist
Page 242 and 243:
Device/Communication 7-19 Status /
Page 244 and 245:
USB keyboard USB memory can be safe
Page 246 and 247:
8 Default Setting (System Menu) Thi
Page 248 and 249:
Switching the Language for Display
Page 250 and 251:
Default Screen Select the screen ap
Page 252 and 253:
Display Bright. Set the brightness
Page 254 and 255:
Size Entry(Y): D b (1.97 - 8.50) x
Page 256 and 257:
Adding a Custom Size and Media Type
Page 258 and 259:
Paper Size and Media Type Setup for
Page 260 and 261:
Paper Size and Media Type Setup for
Page 262 and 263:
Paper Weight 8-17 Default Setting (
Page 264 and 265:
Plain: a b ********************* 1
Page 266 and 267:
Default Paper Source Select the def
Page 268 and 269:
Special Paper Action 8-23 Default S
Page 270 and 271:
Preset Limit Restrict the number of
Page 272 and 273:
Error Handling 8-27 Default Setting
Page 274 and 275:
Function Defaults 8-29 Default Sett
Page 276 and 277:
Original Image Continuous Scan: a b
Page 278 and 279:
Color Selection 8-33 Default Settin
Page 280 and 281:
Copy: a b ********************* 1 *
Page 282 and 283:
Density File Format: a b **********
Page 284 and 285:
File Name Entry Zoom: a b *********
Page 286 and 287:
Common Settings: a b **************
Page 288 and 289:
EcoPrint 8-43 Default Setting (Syst
Page 290 and 291:
XPS FitTo Page Function Default: a
Page 292 and 293:
2 in 1 Layout File Separation: a b
Page 294 and 295:
Page 296 and 297:
Orig. Binding Border Line: a b ****
Page 298 and 299:
Finish Binding 8-53 Default Setting
Page 300 and 301:
Color TIFF Comp. Detail Setting: a
Page 302 and 303:
Page 304 and 305:
Optional Memory 8-59 Default Settin
Page 306 and 307:
Restart. Are you sure? [ Yes ] [ No
Page 308 and 309:
Paper Selection Photo Processing:a
Page 310 and 311:
Auto % Priority AutoPaperSelect.:a
Page 312 and 313:
8-67 Default Setting (System Menu)
Page 314 and 315:
Select Key Set.: a b **************
Page 316 and 317:
Use the procedure below to set Sele
Page 318 and 319:
Check beforeSend:a b **************
Page 320 and 321:
• Sharpness • Backgrnd Density
Page 322 and 323:
Job Retention Deletion Quick Copy J
Page 324 and 325:
Printer Settings 8-79 Default Setti
Page 326 and 327:
When KPDL(Auto) Is Selected for Emu
Page 328 and 329:
Override A4/LTR Printer: a b ******
Page 330 and 331:
Copies Printer: a b ***************
Page 332 and 333:
Orientation Set the default orienta
Page 334 and 335:
Wide A4 8-89 Default Setting (Syste
Page 336 and 337:
CR Action Printer: a b ************
Page 338 and 339:
Paper Feed Mode Print Offset(V): D
Page 340 and 341:
Printing Reports/Sending Notice 8-9
Page 342 and 343:
Page 344 and 345:
Send Result Report 8-99 Default Set
Page 346 and 347:
Adjustment/Maintenance Adjust print
Page 348 and 349:
AutoColorCorrect Manual: a b 3 -1 *
Page 350 and 351:
Page 352 and 353:
Detailed Settings Normal: a b *****
Page 354 and 355:
Detail: a b ********************* 1
Page 356 and 357:
Correct. Bk Line 8-111 Default Sett
Page 358 and 359:
Service Setting: a b **************
Page 360 and 361:
Service Setting: a b **************
Page 362 and 363:
Date/Timer Date/Timer settings incl
Page 364 and 365:
Date Format 8-119 Default Setting (
Page 366 and 367:
Summer Time Time Zone: a b ********
Page 368 and 369:
Error Clear Timer Sys. Menu/Count.:
Page 370 and 371:
Sleep Timer 8-125 Default Setting (
Page 372 and 373:
Login User Name: L b **************
Page 374 and 375:
Panel Reset Timer Timer Setting: a
Page 376 and 377:
Page 378 and 379:
Editing Destination (Address Book/A
Page 380 and 381:
Entering E-mail Address Entering Fo
Page 382 and 383:
Path: A b SD3\report* ABC [ Text ]
Page 384 and 385:
Adding a Group 8-139 Default Settin
Page 386 and 387:
Entering Group Member Detail: C b G
Page 388 and 389:
Editing a Destination Detail: C b A
Page 390 and 391:
Adding a Destination on One-touch K
Page 392 and 393:
Overwrite. Are you sure? z No. 1 [
Page 394 and 395:
Network Setup The following network
Page 396 and 397:
NetWare Setup System: a b *********
Page 398 and 399:
AppleTalk Setup 8-153 Ether-II 802.
Page 400 and 401:
WSD Print Setup WSD-SCAN: a b *****
Page 402 and 403:
Protocol Detail Make other network
Page 404 and 405:
Network Setting: a b **************
Page 406 and 407:
IPP Security Network Setting: a b *
Page 408 and 409:
Sys. Menu/Count.:a b 1 Report 2 Cou
Page 410 and 411:
SNMPv3 Setting Secure Protocol: a b
Page 412 and 413:
Rule Setting: a b *****************
Page 414 and 415:
USB Host: a b *********************
Page 416 and 417:
Optional interface (Optional interf
Page 418 and 419:
Security Level (Security Level sett
Page 420 and 421:
9 Maintenance This chapter describe
Page 422 and 423:
Cleaning the paper transfer unit 9-
Page 424 and 425:
9-5 Maintenance 4 Make sure the rel
Page 426 and 427:
New Waste Toner Box 9-7 4 Open the
Page 428 and 429:
10 Troubleshooting This chapter exp
Page 430 and 431:
Symptom Checkpoints Corrective Acti
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Error Message Checkpoints Correctiv
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Online Help Messages 10-17 Troubles
Page 446 and 447:
Paper jam in the paper feeder 10-19
Page 448 and 449:
10-21 Troubleshooting 2 Open the le
Page 450 and 451:
11 Management This chapter explains
Page 452 and 453:
Sys. Menu/Count.:a b **************
Page 454 and 455:
Login/Logout 11-5 Management Once y
Page 456 and 457:
User Login Set.: a b 1 User Login *
Page 458 and 459:
Changing user information User/Job
Page 460 and 461:
Group Auth.: a b ******************
Page 462 and 463:
Job Accounting 11-13 Management Job
Page 464 and 465:
Login/Logout If job accounting is e
Page 466 and 467:
Managing Accounts Menu: a b 1 Detai
Page 468 and 469:
Overwrite. Are you sure? z k Osaka
Page 470 and 471:
Restriction Items [Split] selected
Page 472 and 473:
Applying Limit of Restriction Limit
Page 474 and 475:
Default Counter Limit When you add
Page 476 and 477:
Counting the Number of Pages Printe
Page 478 and 479:
User/Job Account:a b 1 User Login S
Page 480 and 481:
Printing an Accounting Report Total
Page 482 and 483:
Checking the Counter You can check
Page 484 and 485:
Appendix • Optional Equipment....
Page 486 and 487:
Precautions for Handling the Memory
Page 488 and 489:
Optional Function You can use the o
Page 490 and 491:
System: a b ********************* 1
Page 492 and 493:
Selecting Type of Characters To ent
Page 494 and 495:
Characters associated with differen
Page 496 and 497:
Supported types Supported paper siz
Page 498 and 499:
Choosing the Appropriate Paper This
Page 500 and 501:
Curl: Most paper naturally tends to
Page 502 and 503:
Envelopes Envelopes should always b
Page 504 and 505:
Coated Paper Coated paper is create
Page 506 and 507:
Sharpness adjustment Adjust the sha
Page 508 and 509:
Paper Capacity Cassette 1 250 sheet
Page 510 and 511:
Scanner Item Description Operating
Page 512 and 513:
Glossary AppleTalk AppleTalk, which
Page 514 and 515:
NetWare Novell's network management
Page 516 and 517:
Index Numerics 1-sided/2-sided Sele
Page 518 and 519:
J Job Available Status 7-2 Cancelin
Page 520 and 521:
Sending Size Selection 5-4 Setup 8-
Page 525 and 526:
First edition 2011.4 2MAKMEN000
show all

DCC 6526L/6626L - TA Triumph-Adler GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?