DCC 6526L/6626L - TA Triumph-Adler GmbH

• Sharpness
• Backgrnd Density
Use the procedure below to set Select Key Set.
Sys. Menu/Count.:a b
*********************
; Document Box
< Edit Destination
= Adjust/Maint.
[ Exit ]
Document Box: a b
*********************
1 Sub Address Box
2 Select Key Set.
3 Polling Box
[ Exit ]
Select Key Set.: a b
*********************
1 Print
2 Store
[ Exit ]
Print: a b
*********************
1 Left
2 Right
[ Exit ]
Left: a b
*********************
1 None
2 Collate
3 Paper Selection
8-75
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the or
key to select [Document Box].
2 Press the OK key. The Document Box menu
appears.
3 Press the or key to select [Select Key Set.].
4 Press the OK key. Select Key Set. appears.
5 Press the or key to select [Print] or [Store].
6 Press the OK key. This displays the flexible key
selection screen for the function selected in step 5.
The screen shown is the one when [Print] is
selected.
7 Press the or key to select [Left] or [Right].
8 Press the OK key. This displays the function
selection screen for the flexible key selected in
step 7. The screen shown is the one when [Left] is
selected.
9 Press the or key to select the function you
want to register to the flexible key.
8