DCC 6526L/6626L - TA Triumph-Adler GmbH

IPSec Setting
8-166
Default Setting (System Menu)
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
4 WSD-SCAN
5 WSD-PRINT
*********************
6 IPSec
[ Exit ]
IPSec: a b
*********************
1 *Off
2 On
1 In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the or key to select [IPSec].
6 Press the OK key. IPSec appears.
7 Press the or key to select [On] or [Off].