DCC 6526L/6626L - TA Triumph-Adler GmbH

USB Host: a b
*********************
1 *Unblock
2 Block
USB Device (USB interface setting)
8-169
Default Setting (System Menu)
6 Press the OK key. USB Host appears.
7 Press the or key to select [Unblock] or
[Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the I/F Block Set. menu.
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
1 Network Setting
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
I/F Block Set.:
1 USB Host
a b
*********************
2 USB Device
3 Option I/F1
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the or key to select [I/F Block Set.].
4 Press the OK key. The I/F Block Set. menu
appears.
8