DCC 6526L/6626L - TA Triumph-Adler GmbH

Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
*********************
1 TCP/IP Settings
2 NetWare
3 AppleTalk
[ Exit ]
NetWare: a b
*********************
1 *Off
2 On
Frame Type: a b
*********************
1 *Auto
2 802.3
3 Ether-II
8-152
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the or key to select [NetWare].
6 Press the OK key. NetWare appears.
7 Press the or key to select [On] or [Off].
If you select [On] and press the OK key, Frame
Type appears. Press the or key to select the
desired frame type.
The available frame types are as follows:
Auto
802.3