DCC 6526L/6626L - TA Triumph-Adler GmbH

DP Read Action
Auto % Priority: a b
*********************
1 *Off
2 On
8-66
Default Setting (System Menu)
4 Press the OK key. AutoPaperSelect. appears.
5 Press the or key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
You can set whether priority is given to speed or image quality when scanning an original on the document
processor.
The table below shows the available settings. The default setting is Speed Priority.
Item Detail
Speed Priority Priority is given to speed when scanning
Quality Priority Priority is given to image quality when scanning
Use the procedure below to specify the DP Read Action.
Sys. Menu/Count.:a b
*********************
7 Copy
8 Printer
9 Send
[ Exit ]
Copy: a b
*********************
1 Photo Processing
2 Paper Selection
3 AutoPaperSelect.
[ Exit ]
DP Read Action: a b
*********************
1 *Speed Priority
2 Quality Priority
1 In the Sys. Menu/Count. menu, press the or
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the or key to select [DP Read Action].
4 Press the OK key. DP Read Action appears.