DCC 6526L/6626L - TA Triumph-Adler GmbH

Service Setting: a b
*********************
1 Service Status
2 Network Status
3 Test Page
[ Exit ]
Altitude Adj.: a b
*********************
1 *Normal
2 High 1
3 High 2
MC (Main charger output setting)
8-115
Default Setting (System Menu)
4 Press the OK key. The Service Setting menu
appears.
5 Press the or key to select [Altitude Adj.].
6 Press the OK key. Altitude Adj. appears.
7 Press the or key to select [Normal], [High 1]
or [High 2].
8 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
This sets the output of the main charger. When print quality has deteriorated, the output of the main charger
can be changed to restore print quality.
NOTE: This menu only appears when the Altitude Adj. (Altitude adjustment setting) on page 8-114 is set to
[Normal].
Use the procedure below to set the main charger output setting.
Sys. Menu/Count.:a b
; Document Box
< Edit Destination
*********************
= Adjust/Maint.
[ Exit ]
Adjust/Maint.: a b
*********************
1 Copy Denst. Adj.
2 Send/Box Density
3 AutoColorCorrect
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the or key to select [Service Setting].
8