DCC 6526L/6626L - TA Triumph-Adler GmbH

Error Message Checkpoints Corrective Actions
Error Code:2101,
2102, 2103, 2201, 2202,
2203, 2231, 3101
Error Code:4701,
5101, 5102, 5103, 5104,
7102, 720f
Did you enter an invalid host
name or IP address?
Is the wrong port number
specified?
Are you correctly connected
to the network?
10-14
Enter the correct host name or IP
address.
Troubleshooting
—
Specify the correct port number. —
Make sure that the network cable has
been correctly connected.
Make sure that the network
environment (server, hub, or other
LAN network) is operating correctly.
– Turn the main power switch off and
then on. If this occurs repeatedly,
write down the error code that
appears in the message display and
contact a service technician. (See the
procedure in Machine failure. Call
service.)
Error Code:9181 Have more than 999 original
pages been scanned?
Error Code:1101 Is the SMTP/POP3 server
name incorrect?
Error Code:1102 Did you specify an invalid
user or password?
Error Code:1104 Did you specify the
destination address?
Scan To Email Error Code
If there are more than 999 original
pages, send the pages in separate
batches.
Set the correct server name in
Embedded Web Server.
Enter the correct user name and
password.
—
—
—
—
—
Specify the destination address. —
Error Code:1105 Is SMTP protocol enabled? Enable SMTP protocol in Embedded
Web Server.
Error Code:2101,
2102, 2103, 2201, 2202,
2203
Is "Other Authenticate"
selected when POP before
SMTP authentication is
performed?
Is the specified server an
SMTP server?
Are you correctly connected
to the network?
Error Code:2204 Were you attempting to
send too much data?
Select a valid POP3 user other than
"Other".
Set the correct server name in
Embedded Web Server.
Make sure that the network cable has
been correctly connected.
Make sure that the network
environment (server, hub, or other
LAN network) is operating correctly.
Change the size that can be sent in
Embedded Web Server.
Reference
Page
—
—
—
—
—