DCC 6526L/6626L - TA Triumph-Adler GmbH

Setting E-mail Subject
Job Log History:
1 Auto Sending
a b
*********************
2 Send History
3 Destination
[ Exit ]
Send the job log
history.
Are you sure?
[ Yes ] [ No ]
Enter destination.
Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
Job Log History:
2 Send History
3 Destination
a b
*********************
4 Subject
[ Exit ]
Subject: B b
%printer*
ABC
[ Text ]
7-17
Status / Job Cancel
1 In the Job Log History menu, press the or key
to select [Send History].
2 Press the OK key. A confirmation screen appears.
IMPORTANT: If no destination is registered, Enter
destination is displayed. Refer to Registering
Destination on page 7-15 and register the desired
destination
3 Press [Yes] (the Left Select key). Accepted. is
displayed and the job log is sent to the registered
destination before the screen returns to the Job
Log History menu.
1 In the Job Log History menu, press the or key
to select [Subject].
2 Press the OK key. Subject appears.
NOTE: Refer to Character Entry Method on
Appendix-8 for details on entering characters.
3 Enter the subject.
4 Press the OK key. Completed. is displayed and the
screen returns to the Job Log History menu.
7