DCC 6526L/6626L - TA Triumph-Adler GmbH

HTTP Security
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
*********************
7 Secure Protocol
8 Host Name
9 LAN Interface
[ Exit ]
Secure Protocol: a b
1 SSL
*********************
2 IPP Security
3 HTTP Security
[ Exit ]
IPP Security: a b
1 IPP/IPP over SSL
*********************
2 *IPPoverSSL only
8-162
2 The System menu appears.
Specify the protocol to be used for HTTP. The default setting is HTTPS only.
Use the procedure below to make the setting.
Default Setting (System Menu)
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the or key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the or key to select [IPP Security].
8 Press the OK key. IPP Security appears.
9 Press the or key to select [IPP/IPP over SSL]
or [IPPoverSSL only].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.