DCC 6526L/6626L - TA Triumph-Adler GmbH

Group Auth.: a b
*********************
1 *Off
2 On
Displaying Network User Property
11-11
Management
4 Press the or key to select [Group Auth.].
5 Press the OK key. Group Auth. appears.
6 Press the or key to select [On] or [Off].
7 Press the OK key.
Completed. is displayed and the screen returns to
the User/Job Account menu.
Use the procedure below to display the property of the user logged on using the network authentication. This
menu can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE: Refer to Character Entry Method on Appendix-8 for details on entering characters.
User Login Set.: a b
*********************
1 User Login
2 Local User List
3 Group Auth.
[ Exit ]
NW User Property:a b
*********************
1 *Off
2 On
1 See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
2 Press the or key to select [User Login Set.].
3 Press the OK key. The User Login Set. menu
appears.
4 Press the or key to select [NW User
Property].
5 Press the OK key. NW User Property appears.
6 Press the or key to select [On] or [Off].
7 Press the OK key.
11