Download the ST9340 Printer Reference Guide

Understanding the operator panel
Understanding the operator panel
This section contains information about understanding the operator panel, changing printer settings,
and understanding operator panel menus.
You can change most printer settings from your software application or printer driver. Settings you
change from the application or printer driver apply only to the job you are preparing to send to the
printer.
Changes made to printer settings from a software application override changes made from the
printer operator panel.
If you cannot change a setting from your application, use the printer operator panel or the remote
operator panel available from MarkVision. Changing a printer setting from the printer operator panel
or from MarkVision makes that setting the user default.
The printer operator panel has a 2-line by 16-character liquid crystal display (LCD), five buttons, and
one indicator light that flashes when the printer is processing a job indicated by the Busy message.
Indicator light
Light
1 Menu 2
Select 3
Go 5 Stop 6
Return 4
The indicator light gives information about the status of your printer. If the light is:
• Off, the printer is off
• On, the printer is on, but idle
• Blinking, the printer is on and is busy
Using the operator panel buttons
Use the five operator panel buttons to open a menu, scroll through a list of values, change printer
settings, and respond to printer messages.
202
LCD