Download the ST9340 Printer Reference Guide

More documents

Recommendations

Info

Values: Using the printer menus Off Printer does not sound an alarm. Single* Printer sounds three quick beeps. Continuous Printer repeats three beeps every 10 seconds. Toner Alarm Purpose: To specify how the printer responds when it is out of toner. Values: See also: Off* An error message is displayed until someone replaces the toner cartridge. If an Auto Continue value is selected from the Setup Menu, the printer resumes printing after the specified timeout value. Single Printer stops printing, displays an error message, and sounds three quick beeps. Continuous Printer stops printing, displays an error message, and repeats three beeps every 10 seconds until the toner cartridge is replaced. Auto Continue Staple Alarm Purpose: To specify how the printer responds when it is out of staples. Values: See also: Off* Load Staples is displayed until someone loads staples. If an Auto Continue value is selected from the Setup Menu, the printer resumes printing after the specified timeout value. Single Printer stops printing, displays Load Staples, and sounds three quick beeps. Continuous Printer stops printing, displays Load Staples, and repeats three beeps every 10 seconds until the staple cartridge is replaced. Auto Continue 234
Job Accounting Purpose: Using the printer menus To store statistical information about your most recent print jobs on the hard disk. The statistics include whether the job printed with or without errors, the print time, the job size (in bytes), the requested size and paper type, the total number of printed pages, and the number of copies requested. Values: See also: Off* Printer does not store job statistics on disk. On Printer stores job statistics for the most recent print jobs. Note: Job Accounting is only displayed when a hard disk is installed, is neither defective nor Read/Write or Write protected, and Job Buffer Size is not set to 100%. Job Acct Stat 235
Page 1 and 2:
Laser printer family User’s Refer
Page 3 and 4:
Contents Print media guidelines ...
Page 5 and 6:
Contents Identifying the print medi
Page 7 and 8:
Contents Help Menu ................
Page 9 and 10:
Edition: December 2002 © Copyright
Page 11 and 12:
Safety information Since the GNU li
Page 13 and 14:
Electronic emission notices This Cl
Page 15 and 16:
Laser notice Class I laser products
Page 17 and 18:
1 Overview Identifying printers Use
Page 19 and 20:
2 Printing This chapter covers tips
Page 21 and 22:
2 Select the job you want to cancel
Page 23 and 24:
Printing a directory list Printing
Page 25 and 26:
Printing folio and statement sizes
Page 27 and 28:
Curl Print media guidelines Curl is
Page 29 and 30:
Print media guidelines • Flex pap
Page 31 and 32:
Transparencies Print media guidelin
Page 33 and 34:
Labels Print media guidelines Your
Page 35 and 36:
Identifying print media sources and
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Loading print media Loading print m
Page 45 and 46:
Loading print media in standard and
Page 47 and 48:
Loading print media in optional uni
Page 49 and 50:
Loading print media in optional uni
Page 51 and 52:
Using and loading the multipurpose
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Loading envelopes Using and loading
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Using and loading the optional enve
Page 65 and 66:
Using and loading the optional enve
Page 67 and 68:
Using and loading the optional 2000
Page 69 and 70:
Using and loading the optional 2000
Page 71 and 72:
Linking trays 12 Insert the guides
Page 73 and 74:
Using the output bins Using the out
Page 75 and 76:
Using the support extension in the
Page 77 and 78:
Conserving supplies Conserving supp
Page 79 and 80:
Ordering supplies 79
Page 81 and 82:
Storing the print cartridge Storing
Page 83 and 84:
Installing the new print cartridge
Page 85 and 86:
Replacing the charge roll 6 Push th
Page 87 and 88:
Replacing the charge roll 11 Align
Page 89 and 90:
Replacing the transfer roller Repla
Page 91 and 92:
Replacing the transfer roller 7 Gra
Page 93 and 94:
Replacing the pick rollers 1 Remove
Page 95 and 96:
Replacing the pick rollers 4 Push t
Page 97 and 98:
Replacing the label fuser cleaner 3
Page 99 and 100:
Replacing the staple cartridge Repl
Page 101 and 102:
Replacing the staple cartridge 3 Pu
Page 103 and 104:
Resetting the maintenance counter R
Page 105 and 106:
Solving display problems Problem Ac
Page 107 and 108:
Problem Action Job prints from the
Page 109 and 110:
Problem Action ABC DEF Solving prin
Page 111 and 112:
Solving option problems The followi
Page 113 and 114:
Solving option problems Solving pro
Page 115 and 116:
6 Clearing jams By carefully select
Page 117 and 118:
Identifying the print media path Id
Page 119 and 120:
Identifying the print media path Us
Page 121 and 122:
200 and 201 Paper Jam Remove Cartri
Page 123 and 124:
202 Paper Jam Open Rear Door • If
Page 125 and 126:
202 Paper Jam Open Rear Door • If
Page 127 and 128:
23x Paper Jam • If the middle sec
Page 129 and 130:
23x Paper Jam - Pull down and out i
Page 131 and 132:
23x Paper Jam - Pull down and out i
Page 133 and 134:
23x Paper Jam 3 Close the duplex re
Page 135 and 136:
236 Paper Jam Check Duplex 23x Pape
Page 137 and 138:
23x Paper Jam 2 While grasping the
Page 139 and 140:
23x Paper Jam 11 Remove any sheets
Page 141 and 142:
23x Paper Jam • If the end of the
Page 143 and 144:
23x Paper Jam 6 Close the duplex re
Page 145 and 146:
23x Paper Jam 15 If the edge of the
Page 147 and 148:
24x Paper Jam Check Tray x On the i
Page 149 and 150:
24x Paper Jam Check Tray x Across a
Page 151 and 152:
24x Paper Jam Check Tray x d Gently
Page 153 and 154:
260 Paper Jam Check Env Feeder 260
Page 155 and 156:
27x Paper Jam Check Bin x 7 Pull th
Page 157 and 158:
27x Paper Jam Check Bin x A short s
Page 159 and 160:
28x Paper Jam 28x Paper Jam Jams in
Page 161 and 162:
Clearing stapler jams 3 Remove the
Page 163 and 164:
Clearing stapler jams 3 Press the l
Page 165 and 166:
Clearing stapler jams 9 Push the ca
Page 167 and 168:
Clearing stapler jams 3 Use the met
Page 169 and 170:
7 Administration The following sect
Page 171 and 172:
Weight and style Understanding font
Page 173 and 174:
Understanding fonts Scalable fonts
Page 175 and 176:
Understanding fonts Resident scalab
Page 177 and 178:
Understanding fonts Resident scalab
Page 179 and 180:
Readability disclaimer Understandin
Page 181 and 182:
Using the Print and Hold function M
Page 183 and 184: Using the Print and Hold function 4
Page 185 and 186: Removing optional cards Use the but
Page 187 and 188: Removing optional cards c Press dow
Page 189 and 190: Removing optional cards 6 If you ne
Page 191 and 192: Removing optional cards 4 Grasp the
Page 193 and 194: 2 Close the side door. 3 Close the
Page 195 and 196: Removing options 2 Push the envelop
Page 197 and 198: Removing options 2 Detach the outpu
Page 199 and 200: Removing options 4 Carefully lift t
Page 201 and 202: Removing options 2 Carefully lift t
Page 203 and 204: Using the operator panel buttons Th
Page 205 and 206: Menus Disabled User default setting
Page 207 and 208: Select a menu or menu item for more
Page 209 and 210: Values: First select a source: Usin
Page 211 and 212: Then select the values: See also: O
Page 213 and 214: Substitute Size Purpose: Using the
Page 215 and 216: Values: First select a paper type:
Page 217 and 218: Values: See also: Copies Purpose: U
Page 219 and 220: Multipage Print Purpose: Using the
Page 221 and 222: Staple Prime Src Purpose: Using the
Page 223 and 224: Print Directory Purpose: Using the
Page 225 and 226: Job Acct Stat Purpose: Using the pr
Page 227 and 228: Cancel Job Purpose: To cancel the c
Page 229 and 230: Values: Using the printer menus 300
Page 231 and 232: Using the printer menus Select a hi
Page 233: Values: On Printer reprints jammed
Page 237 and 238: Values: R0 Courier 10* Using the pr
Page 239 and 240: Values: Using the printer menus 198
Page 241 and 242: PDF Menu Using the printer menus Us
Page 243 and 244: PS SmartSwitch Purpose: Using the p
Page 245 and 246: Values: Honor Init Purpose: Using t
Page 247 and 248: PS SmartSwitch Purpose: Using the p
Page 249 and 250: Values: Using the printer menus On
Page 251 and 252: Values: USB Buffer Purpose: Using t
Page 253 and 254: Values: See also: Using the printer
Page 255 and 256: Values: Using the printer menus DTR
Page 257 and 258: Using the printer menus diagnosing
Page 259 and 260: Understanding the printer messages
Page 275 and 276: disabling operator panel menus 169
Page 277 and 278: laser notices 14 length guide 45 le
Page 279 and 280: messages (continued) Tray Missing
Page 281 and 282: PictureGrade (Quality Menu) 229 PIN
Page 283 and 284: Setup Menu 229 Alarm Control 233 Au
Page 285:
© 2002 Lexmark International, Inc.
show all

Download the ST9340 Printer Reference Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?