Download the ST9340 Printer Reference Guide

Understanding the printer messages
Message What this message means What you can do
63 Unformatted Disk The printer detects an unformatted
hard disk.
64 Unsupported Disk
Format
80 Scheduled
Maintenance
The printer detects an unsupported
disk format.
The printer requires replacement of
routine maintenance items to maintain
top performance and avoid print
quality and paper feed problems.
88 Toner Low The printer has detected that the toner
supply in the print cartridge is low. If
you do not have a print cartridge on
hand, order one now.
900–999 Service
Messages labeled 900–999 relate to
printer problems that may require
printer service.
273
• Press Go to clear the message
and continue printing.
• Format the disk before
performing any disk operations.
To format the disk, select Format
Disk from the Utilities Menu.
• If the error message remains, the
hard disk may be defective and
require replacing. Install a new
hard disk and format it.
See also: Format Disk
• Press Go to clear the message.
• Format the disk.
Note: Disk operations will not be
allowed until the disk is formatted.
Replace the maintenance items
and reset the printer maintenance
counter, if necessary.
See also: Resetting the
maintenance counter
• Shake the print cartridge to
utilize the remaining toner.
• Replace the print cartridge.
• Press Go to clear the message
and continue printing. The
Supplies message is displayed
until you replace the print
cartridge.
See also: Replacing the print
cartridge
Turn the printer off and check all
cable connections. Turn the printer
back on.
See also: Contacting service