Download the ST9340 Printer Reference Guide

Values:
Using the printer menus
198 mm* Makes the logical page compatible with the Hewlett-Packard LaserJet 5
Printer.
203 mm Makes the logical page wide enough to print eighty 10-pitch characters.
Tray Renumber
Purpose:
To configure your printer to work with printer drivers or applications that use different source
assignments for the paper trays.
First select a source:
Assign Tray Assign Env Feeder Assign Man Env
Assign MP Feeder Assign Man Paper
Then select a value:
Off* Printer uses factory default source assignments.
0...199 Select a numeric value to assign a custom value to a source.
None Source ignores the Select Paper Feed command.
Other Tray Renumber selections:
View Factory Def Press Menu to display the factory default value assigned to each
source.
Restore Defaults Select Yes to return all tray assignments to factory default values.
Auto CR after LF
Purpose:
To specify whether the printer automatically performs a carriage return after a line feed control
command.
Values:
Off* Printer does not perform a carriage return after a line feed control command.
On Printer performs a carriage return after a line feed control command.
Auto LF after CR
Purpose:
To specify whether the printer automatically performs a line feed after a carriage return control
command.
239