Download the ST9340 Printer Reference Guide

Using the printer menus
To specify whether to print the annotations within the PDF file. Annotation tools provide a variety of
methods for marking up text and attaching notes and commentaries to PDF documents. If you select
to print annotations, a new PDF file is created which lists all the annotation notes within the original
PDF.
Values:
Do Not Print* Do not print the annotations in the PDF file.
Print Print the annotations in the PDF file.
Parallel Menu
Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel
port (either Std Parallel or Parallel Opt ).
Select a menu item for more details:
Advanced Status Parallel Mode 1
Honor Init Parallel Mode 2
Job Buffering PCL SmartSwitch
MAC Binary PS PS SmartSwitch
NPA Mode Protocol
Parallel Buffer
PCL SmartSwitch
Purpose:
Note: Values marked by an asterisk (*) are the factory default settings.
To configure the printer so it automatically switches to PCL emulation when a print job received
through the parallel port requires it, regardless of the default printer language.
Values:
See also:
On* Printer examines data on the parallel interface and selects PCL emulation if the
data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation
to process the job if PS SmartSwitch is On, or uses the default printer language
specified in the Setup Menu if PS SmartSwitch is Off.
Printer Language; PS SmartSwitch
242