Download the ST9340 Printer Reference Guide

Values:
Using the printer menus
On Printer processes raw binary PostScript print jobs from computers using the
Macintosh operating system.
This setting often causes Windows print jobs to fail.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh
operating systems.
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt ).
Select a menu item for more details:
Job Buffering PCL SmartSwitch
Network Buffer PS SmartSwitch
Network Setup Std Net Setup
NPA Mode
PCL SmartSwitch
Purpose:
Note: Values marked by an asterisk (*) are the factory default settings.
To configure the printer so it automatically switches to PCL emulation when a print job received
through the network port requires it, regardless of the default printer language.
Values:
See also:
On* Printer examines data on the network interface and selects PCL emulation if the
data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation
to process the job if PS SmartSwitch is On, or uses the default printer language
specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language
246