Download the ST9340 Printer Reference Guide

Values:
USB Buffer
Purpose:
Using the printer menus
On Printer performs NPA processing. If data is not in NPA format, it is rejected as
bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it
appropriately.
Note: Changing this menu item automatically resets the printer.
To configure the size of the USB input buffer.
Values:
See also:
Disabled Job buffering is disabled. Any jobs already buffered on the disk are
printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates the USB Buffer size (recommended
setting).
3K to maximum User specifies the USB Buffer size. The maximum size depends on the
size allowed amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for
the USB Buffer size, disable or reduce the size of the parallel, serial,
and network buffers.
Note: Changing the USB Buffer menu item automatically resets the printer.
Resource Save
Job Buffering
Purpose:
To temporarily store jobs on the printer hard disk before printing.
Values:
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.
Note: Changing the Job Buffering menu item automatically resets the printer.
251