Download the ST9340 Printer Reference Guide

Using and loading the optional 2000-sheet drawer
3 Flex each stack of print media back and forth. Do not fold or crease the paper. Straighten the
edges on a level surface. To prepare transparencies for loading, see page 54.
4 Slightly bend the stack of print media as shown and place it on the elevator tray with the
preferred print side facing down. Align the stack of print media to the back of the drawer.
Carefully align each stack as you load it to ensure a smooth edge where the stacks meet. Do
not load print media above the load line.
This illustration shows the correct orientation for loading paper for simplex printing.
Letterhead paper should be loaded with the printed side face down and the page top to the
front of the drawer. Do not mix weights of paper.
For duplex printing on letterhead paper, place the printed side face up with the page top to the
rear of the drawer.
5 Close the loading door.
Note: If you need to return your 2000-sheet drawer, make sure all paper has been
removed from the unit before packing.
68