Download the ST9340 Printer Reference Guide

Cancel Job
Purpose:
To cancel the current print job.
See also:
Using the printer menus
Note: Cancel Job is only displayed if the printer is processing a job or has a job in printer
memory.
Canceling a print job
Reset Printer
Purpose:
To reset the printer to the user default value for each menu item, delete all downloaded resources
(fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface
link buffer.
Print Buffer
Purpose:
Note: Before selecting Reset Printer, exit the software application you are using.
To print any data stored in the print buffer.
Reset Active Bin
Purpose:
Note: Print Buffer is only available when you enter the Job Menu while Waiting is
displayed. The Waiting state occurs if an incomplete job is sent to the printer or an
ASCII job, such as a print screen command, is printing.
To define the active bin as the start bin (the first bin to receive printed output) in a set of linked bins.
Prime Stapler
Purpose:
To prepare the stapler for proper functioning after a staple cartridge is replaced or a staple jam is
cleared. Priming Stapler is displayed, and the stapler inserts several staples into a sheet of paper.
Note: Prime Stapler is only displayed if a finisher is installed.
227