2 - Pitney Bowes Canada

■ The machine will only answer calls to its registered number.
■ The first two rings are silent on the machine. This is because the
fax must «listen» to the ring pattern (to compare it to the pattern
that was ‘registered’). (Other telephones on the same line will ring.)
■ If you program the machine properly, it will recognize the
registered ring pattern of the ‘fax number’ within 2 ring patterns
and then answer with a fax tone. When the ‘voice number’ is
called, the machine will not answer.
Registering the Distinctive Ring pattern
Very important!
After you have set the Distinctive Ring feature to ON, the receive mode
is set to Manual automatically. Unless you have a TAD or Voice Mail
set up on the Distinctive Ring number, Manual mode means you must
answer all the calls yourself. You cannot change the receive mode to
any other mode while the Distinctive Ring is set to on.
1 Press Menu, 2, 0, 5.
2 Press or to select Set.
Press Set.
3 Press or to select the stored ring pattern you want to
use.
Press Set.
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
4 Press Stop/Exit.
Distinctive Ring is now set to on.
Turning off the Distinctive Ring
1 Press Menu, 2, 0, 5.
2 Press or to select Off.
Press Set.
3 Press Stop/Exit.
Miscellaneous
5.Distinctive
Miscellaneous
5.Distinctive
If you turn off Distinctive Ring, the machine will stay in Manual
receive mode. You will need to set the Receive Mode again.
(See To select or change your Receive Mode on page 5-2.)
SETUP RECEIVE 5 - 12