Untitled - Sciencemadness Dot Org

SHOCK INITIATION PROPERTIES
Table 4.48 UTP-20930 CLASS VII PROPELLANT
Data Summary
p. = 1.838 g/cm3. T, = 24°C. Technique 7
Coordinates for
High-Order
Initial Shock Parameters Detonation
Shot U x* t* Driving System Thickness
Number (G?a) CrnZ$s) (rnmY;s) (mm) (ps) (mm)
--
E-4608
E-4603
E-4598
E-4594
E-4602
E-4600
E-4605
E-4601
E-4611
3.13 0.494 3.45 >26 --- B, 17.8 PC, 12.7 SS, 10.9 PMMA’
4.46 0.613 3.96 24.3 5.73 H, 24.1 SS, 18.0 PMMA
4.58 0.635 3.92 26.5 6.2 D, 19 SS, 10.9 PMMA
5.18 0.705 4.00 17.3 4.05 H, 19 SS, 10.9 PMMA
5.39 0.714 4.11 18.3 4.18 H, 19 SS, 10.9 PMMA
6.50 0.830 4.26 10.9 2.33 K, 19 SS, 10.9 PMMA
7.41 0.892 4.52 6.5 1.37 L, 19 SS, 10.9PMMA
7.41 0.942 4.28 7.0 1.53 L, 19 SS, 10.9 PMMA
8.8 0.98 4.9 f 0.1 4.6 0.91 B, 20.3, PMMA
Reduced D;a ta
p = 1.838 g/cm3.
U,, = (2.529 f 0.133) + (2.157 f O.lSl)U,,.
C, = 2.61. mm/ps, Cs = 0.41 mm/Is, and C, = 2.57 mmlps.
419