Masoneilan Products SVI II ESD - GE Energy

More documents

Recommendations

Info

GE Energy SVI II ESD Quick Start Starting PST There are several methods to start a PST (summarized in Table 9): SVI II ESD pushbutton display by selecting “Run PST”. Refer to Figure 22 on page 51 for menu structure. ValVue ESD software interface (standalone or integrated with leading control systems). You can run the PST from the top level screen of ValVue ESD or on the PST screen. HART handheld device, issuing a HART command. Any HART host with DD service. Download the DD from www.dressermasoneilan.com. By issuing a loop current of 16.4 mA for 3 - 5 seconds (ASD or A/DSD models). Using the scheduler in SVI II ESD that automatically starts a PST at a specific date and time. Table 9 PST Startup On Demand PST Initialization PST Trigger or Launching Method Analog set to 16.4 mA ValVue ESD LCD Handheld or any HART Host with DD support Scheduled Built-In calendar in SVI II ESD 58
Specifications and References A Physical and Operational Specifications This section provides the physical and operational specifications for the SVI II ESD. Table 10 Environmental Specifications Operating Temperature Limits -40° F to 185° F (-40° C to 85° C) Storage Temperature Limits -58° F to 200° F (-50° C to 93° C) Temperature Effect < 0.005% / °F typical; -40° F to 180° F (< 0.01% / °C typical; -40° C to 82° C) Supply Pressure Effect Relative Humidity 0.05% per psi (.73% per bar) 10 to 90% non-condensing Humidity Effect Less than 0.2% after 2 days at 104° F (40° C), 95% Relative Humidity. Insulation Resistance MTBF Electromagnetic Compatibility Electrostatic Greater than 10 G Ohms at 50% RH. 49 years based on MIL handbook calculation for electronic parts and field data on mechanical parts Electrostatic discharge — No effect with contact discharge level of 4KV and air discharge level of 8 KV (IEC 1000-4-2) Radio frequency interference — Less than 0.2% at 10 volts per meter (EN 50140) Fast Transient Burst No effect at 2 KV (Coupling clamp IEC 1000-4-4). 59
Page 1 and 2:
GE Energy 04/10 Masoneilan * Produc
Page 3:
SVI II ESD Quick Start Guide Docume
Page 6 and 7:
Operation, Setup, Commissioning. .
Page 8 and 9:
GE Energy SVI II ESD Quick Start Gu
Page 10 and 11:
GE Energy SVI II ESD Quick Start Ac
Page 12 and 13:
GE Energy Product Safety SVI II ESD
Page 14 and 15:
GE Energy SVI II ESD Device Descrip
Page 16 and 17: GE Energy SVI II ESD Quick Start SI
Page 18 and 19: GE Energy Installation SVI II ESD Q
Page 20 and 21: GE Energy SVI II ESD Quick Start Gu
Page 22 and 23: GE Energy Using the Quick Start Gui
Page 24 and 25: GE Energy SVI II ESD Quick Start Ne
Page 26 and 27: GE Energy SVI II ESD Quick Start 4.
Page 28 and 29: GE Energy SVI II ESD Quick Start Di
Page 30 and 31: GE Energy SVI II ESD Quick Start Mo
Page 32 and 33: GE Energy SVI II ESD Quick Start 12
Page 34 and 35: GE Energy SVI II ESD Quick Start Us
Page 36 and 37: GE Energy SVI II ESD Quick Start Ta
Page 38 and 39: GE Energy SVI II ESD Quick Start Do
Page 40 and 41: GE Energy SVI II ESD Quick Start El
Page 42 and 43: GE Energy SVI II ESD Quick Start An
Page 44 and 45: GE Energy SVI II ESD Quick Start To
Page 46 and 47: GE Energy SVI II ESD Quick Start Ch
Page 48 and 49: GE Energy SVI II ESD Quick Start Ou
Page 50 and 51: GE Energy SVI II ESD Quick Start Th
Page 52 and 53: GE Energy SVI II ESD Quick Start Gu
Page 58 and 59: GE Energy SVI II ESD Quick Start NO
Page 60 and 61: GE Energy WARNING SVI II ESD Quick
Page 62 and 63: GE Energy Calibration WARNING SVI I
Page 64 and 65: GE Energy 7. Scroll to line 6 “EX
Page 74 and 75: GE Energy SVI II ESD Quick Start ES
Page 76 and 77: GE Energy SVI II ESD Quick Start Th
Page 78 and 79: GE Energy SVI II ESD Quick Start 6
Page 80 and 81: GE Energy SVI II ESD Quick Start HA
Page 82 and 83: GE Energy SVI II ESD Quick Start 7.
Page 84: GE Energy SVI II ESD Quick Start 9
show all

Masoneilan Products SVI II ESD - GE Energy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?