SAS® Integration Technologies: Administrator's Guide (LDAP Version)

Attributes for sasLogicalNameInfo
The sasLogicalNameInfo object class contains information for an instance of a SAS logical name. The
sasLogicalNameInfo object class is defined using the attributes listed in the following table. For each attribute, the
table shows:
• The name that identifies the attribute on the LDAP server (or in the configuration file).
• "Required" or "Optional" to indicate whether the attribute is required.
• The type of server configuration (COM/DCOM or IOM Bridge) for which the attribute is used.
• A definition of the attribute.
For general information about the use of logical names, refer to Assigning Logical Names. When you use IT
Administrator to add a logical name to a server or spawner definition, IT Administrator automatically creates a
sasLogicalName object.
If you are not using an LDAP server, you can use a configuration file to define the logical name. For instructions, see
Using a Configuration File to Define the Metadata. The spawner does not use this object class. However, if your site
uses logical names, it is recommended that sasLogicalNameInfo instance be created.
Attribute Name
description
In IT
Administrator::
Description
Required/
Optional
Optional
sasLogicalName Attribute Definitions
Server Type
COM/DCOM,
IOM Bridge
objectClass Required COM/DCOM,
IOM Bridge
sasLogicalName Required COM/DCOM,
IOM Bridge
IOM Bridge Servers
Definition
Text to summarize why this object definition exists.
This attribute is not used by the spawner.
The object class identifier. For sasLogicalNameInfo
objects, this is always sasLogicalNameInfo.
The logical name that is being defined
Attributes for sasLogicalNameInfo 109