CLM HD8 - Projector Central

12. Alignment menu
Image 12-9
Image 12-10
2. Use the ▲ or ▼ key to shift the lens upwards or downwards.
Use the ◄ or ► key to shift the lens to the left or to the right.
12.4 Side keystone
What can be done?
The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
Image 12-11
Side keystone
A
B
Keystone adjustment with positive values
Keystone adjustment with negative values
Side keystone adjustment
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Side keystone and press ENTER.
The keystone dialog box appears.
4. Use the ◄ or ► key to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the ◄ key. The value below the bar scale will
be negative.
When the upper part of the image is smaller than the lower part of the image, push the ► key. The value below the bar scale
will be positive.
Image 12-14
Image 12-12
Image 12-13
118 R59770057 CLM HD8 15/03/2010