CLM HD8 - Projector Central
CLM HD8 - Projector Central
CLM HD8 - Projector Central
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
13. <strong>Projector</strong> control<br />
Level 1 Level 2 Level 3<br />
Menu [Center]<br />
Bar scale [Bottom]<br />
Local LCD contrast<br />
Language<br />
English<br />
Français<br />
Deutsch<br />
Español<br />
Italiano<br />
13.2 <strong>Projector</strong> address<br />
Overview<br />
• Individual projector address<br />
• Common address<br />
13.2.1 Individual projector address<br />
About individual projector address<br />
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the<br />
projector.<br />
This individual projector address can then be used to control the projector via remote control or via a serial connection.<br />
Next to an individual projector address, each projector has also a common address for group control.<br />
How to set an individual address?<br />
1. Press MENU to activate the menus.<br />
2. Use the ▲ or ▼ key to select <strong>Projector</strong> control and press ENTER.<br />
3. Use the ▲ or ▼ key to select <strong>Projector</strong> address and press ENTER.<br />
4. Use the ▲ or ▼ key to select <strong>Projector</strong> Address and press ENTER.<br />
The edit projector address window opens.<br />
5. Use the ▲ or ▼ key to select a new value<br />
Or,<br />
enter a new value with the digit keys on the remote control or local keypad.<br />
6. Use the ◄ or ► key to select the next digit and repeat step 5.<br />
7. When the desired address is entered, press ENTER to store that address.<br />
Image 13-3<br />
Image 13-1<br />
Image 13-2<br />
136 R59770057 <strong>CLM</strong> <strong>HD8</strong> 15/03/2010
Change language