CLM HD8 - Projector Central

9. Image menu
Auto
Off
Detects for film and it starts to avoid deinterlacing artefacts, and it results in a perfect artefact-free display.
no detection for film mode.
When film with a banner is projected at the same time, and film mode is auto, the banner will shown possible artefacts as the
software will detect a film.
Image 9-76
Image 9-75
Image 9-77
Image 9-78
9.5.4 Advanced setting, brilliant color look
What can be done ?
The BrilliantColor technology is configured to process the spoke regions of the color wheel as a secondary color which improves
the brightness of the display and gives the viewer a truly life-like image. The look means the shape of the curve of white added to
the image. The amount of added white can be different in the low light than in the high lights. Some predefined looks, optimized for
either computer images or video images are selectable with the brilliant color look function.
Select [data] when projecting computer images.
Select [Vid 1] or [Vid 2] when producing video images.
The brilliant color look setting is stored per source.
How to switch
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Advanced settings and press ENTER.
The Advanced settings menu is displayed.
4. Use the ▲ or ▼ key to select Brilliant color look and press ENTER to toggle between [Data] or [Vid. 1] or [Vid 2].
R59770057 CLM HD8 15/03/2010 87